Aftermarket Wheels, Bigger Tires, Lift Kits (Compilation) for 2025+ 4Runner 6th Gen -- Add Yours!

[JCP]

My new 2025 Toyota OFF ROAD PREMIUM.

See full details at original build thread:
https://www.4runner6g.com/forum/threads/big-blue-trd-off-road-beauty.10690/

Wheels/Tires/Lift:

315/70/17 Falken Wildpeak R/T Tires
Lock Off-Road -12 offset wheels
Westcott Perch collars in front
Dobinson heavy duty rear SPRINGS

What's a Perch Collar? Preload lift? Great looking truck.

Sponsored

 

[RunnerRocks]

Finally finished the Westcott front preload collar lift, OME rear spring, and 35x12.5x18 Baja Boss AT tires.

Very surprised how well this rides compared to my 5th gen, even with the D-rated tires, it's very smooth.

Looks great.

Which OME springs ?

 

[Wavy_Baby_Pro]

Hello! I wanted to share what I've got going on so far with my 2026 Wave Maker Pro:

Suspension:

• Westcott Designs Pre-load Collar lift kit
  • Top Hats were included with the PRO trim, they are advertised as optional but I went ahead and had them installed.

Wheels:

• Relations Race Wheels (RRW)
  • 17" RR7-H Monoforged 2.0 Hybrid in Brushed aluminum
    • 0mm offset
      • I may add the protection rings later on, which will give it a "true" Beadlock look.

Tires:

• General
  • Grabber x3
    • 35x12.50R17

I will add that I went with 0mm offset to have some poke since the PRO fenders do stick out a bit further. The crash bars were removed on each side. There was a very slight rub when the wheel was fully turned (hitting the front fender area). But since I have gotten an alignment, there has been no rubbing at all. I'm sure I will have more planned for it, but as of right now, I'm enjoying it.

See the original build thread at: https://www.4runner6g.com/forum/threads/2026-wave-maker-build.12495/

 

[jimbo285]

275/70R17 Nokian Outpost NAT. In case anyone wondered what these look like on stock SR5 wheels. I love it. Will probably find out firsthand how they do in snow because winter is rapidly approaching.

 

[xp0nex]

what are you guys doing with your spare? I plan on running 35s but not sure what I want to do about the spare. I was planning on just completely removing it.

 

[ThatSickRIp]

275/70R17 Nokian Outpost NAT. In case anyone wondered what these look like on stock SR5 wheels. I love it. Will probably find out firsthand how they do in snow because winter is rapidly approaching.

Nice!
I went 285/70 17 on my stock SR5 wheels and black lugs. I like the wheels the SR5 comes with, not bad at all for OEM. I bought a 5th online for my spare and will be doing all 5 for my rotations

 

[RenoT4R]

A little recent change up.

Swapped the RC spacers for 5100's set at 1.6"

New Wheels: ModCo Forged MF 62 17x9 +25 Brushed
Tires: 285/75R17 Toyo AT3 C Rated

 

[ThatSickRIp]

A little recent change up.

Swapped the RC spacers for 5100's set at 1.6"

New Wheels: ModCo Forged MF 62 17x9 +25 Brushed
Tires: 285/75R17 Toyo AT3 C Rated

I usually dont like that color wheel, but those are clean as hell man. Very nice!

What final height did you get from setting the 5100s to 1.6"? Im leaning on the 5100s set at 1.1" due to height restrictions of my garage

 

[RenoT4R]

@ThatSickRIp I know it's not the proper way to measure but from the ground to the fender these are the heights.

Front: 37.75"
Rear: 38"

 

[ThatSickRIp]

@ThatSickRIp I know it's not the proper way to measure but from the ground to the fender these are the heights.

Front: 37.75"
Rear: 38"

Thanks! The 1.6" might still be an option then for when I do them, it appears that still keeps me where I will need to be for my overall height and not increasing too much

 

[Nodak]

Fuel Contra D643 Gloss Black Red Tint
20x9
6x139.7
5.79 Backspace
20mm Offset
106.10 bore (need to order hub centric ring to fit the oem 95.6 bore of the 6th gen)
38 lbs wheel
2500 lbs load per wheel

https://www.fueloffroad.com/fuel-1p...Z31MurTKJyg19IM0K9mPbXGGYyTQm0h3XRr0n8lDmK9at

put michelin defender ltx ms2 (XL load) in oem size on.

with discount tire specials ($80 instant off and military discount which came out to $228 off)

out the door was $3500

the wife likes them and its her 4runner so thats all that matters.

 

[Beedeviled]

Finally upgraded my 26 Limited.
Westcott Preload kit
Arena A138 Lusso 22x9.5 +25
Toyo Open Country 285x55r22

 

[emerson]

 

[verendus]

See the full build thread at:

https://www.4runner6g.com/forum/thr...hunter-light-2026-trd-orp-custom-build.13015/

Suspension, Wheels & Tires (Most Crucial)

• Suspension: Toyota Trailhunter/OME Takeoff Suspension (struts, coils, springs) + Toyota TRD Pro Billet Aluminum Upper Control Arms (UCAs) — $1,700
• Wheels: Method Race Wheels 703 (Matte Black, 17x8.5, +35mm offset) x5 — $1,200 (heavily discounted)
• Tires: Toyo Open Country A/T III (LT285/70R17, Load Range C) x 5 — $1,600
• Professional Install & Setup: Suspension install, mount & balance, alignment, and Zero Point Calibration by Level 4x4 in Rocklin, CA — $1,050 (highly recommended)
• Total Phase Cost: $5,550

The Rationale: Factory Tuning Meets Aftermarket Fitment

• The Takeoff Suspension: I found a 2,000-mile factory Trailhunter Old Man Emu takeoff package locally. I added the TRD Pro billet UCAs to make sure i have headroom for a proper alignment. Unlike universal aftermarket kits that can ride harsh when empty, this setup was tuned directly by ARB and Toyota for low-speed compliance and trail comfort. I ended up with an ideal ~1.5" front and ~1.25" rear lift, preserving about a 1" factory rake unladen. When loaded with ~500 lbs of gear, the truck sits dead level.
• UCAs & Alignment: The TRD Pro Billet UCAs provided the caster correction needed with the lift. Level 4x4 (Highly recommedned if you are in NorCal) dialed in the specs at +3.7° Left Caster, +3.8° Right Caster, 0° Camber, and 0.16° Total Toe. Tracking is dead straight on the highway and pushes the front tires forward to clear the wheel wells without any rubbing. They also performed a digital Zero Point Calibration, all included in a very reasonable labor cost they charged me.
• Wheels & Tires: The Method 703s (+35mm offset) provide a perfect stance without excessive wheel poke. For rubber, I chose 33-inch Toyo AT3s in Load Range C. They are perfectly flush to the fender flares. The installer recommended 34" instead, but i did not want to penalize breaking distance, fuel economy, and drivetrain gearing. The full-size spare hangs slightly lower underneath (costing about 1° of departure angle), but it’s a minor tradeoff i am willing to live with.

Driving Impressions

On-road, the typical front-end brake dive, highway body roll, and floaty stock damping are completely gone. The truck feels planted, stable, and composed through sweeping bends. There is a faint hum from the Toyo AT3s over highway asphalt compared to passenger-car tires, but it's a negligible trade-off for the substantial off-road capability gain.

Off-road, it glides across washboards and tracks predictably over loose rock. Even with roughly 500 lbs of cargo in the back, suspension travel remains supple with plenty of room for articulation without rubbing. I intentionally keep roof-rack weight minimal to preserve a low center of gravity. If my gear load increases significantly down the road, I might consider stiffer rear coils, but for now, the damping and spring rates feel spot on.

While a factory Trailhunter would have been turnkey, I likely would have swapped the wheels and tires anyway (another $3,500). At $65,000 all-in, I ended up with what I like to call a "Trailhunter Lite"—custom-tailored to exactly how I use it.

See the full build thread at:

https://www.4runner6g.com/forum/thr...hunter-light-2026-trd-orp-custom-build.13015/

 

[abejoharold]

Figured it was time for another update on my 2025 4Runner Limited build!

Wheels / Lift info:

• Westcott Designs Preload Collar Lift – Finally installed! 2.5” front and 0.75” rear. Really happy with how it sits now, and the ride still feels pretty close to OEM.
• Black Rhino Bastion BR601 Fusion Forged Wheels – Switched from my Method 709HD 0 offset wheels to the new polished Bastion BR601s in 17x8.5 +25 offset. Really loving the polished look, especially with the Heritage Blue paint!

See the full update thread at:

https://www.4runner6g.com/forum/threads/2025-4runner-limited-build-update-–-slowly-coming-together-.13059/

Sponsored