Aftermarket Wheels, Bigger Tires, Lift Kits (Compilation) for 2025+ 4Runner 6th Gen -- Add Yours!

[zeja0331]

Hopefully this helps someone. I know I wasted a lot of time worrying about tire size, offset and the potential for rubbing without a lift. 

Faliken Wildpeak AT4W C rated 285/70/17
Method 703, +35 offset
TRD Sport

No rub, no issues everything stock.

Thrilled with how it turned out. Exactly the look I wanted. Aggressive, thick look and minimal poke.

Just won’t pay attention to fuel economy 

Sponsored

 

[Joestac]

275/70/18 BFG KO3 +20 Offset No Rub

Stopped by Discount Tire today to look at the KO3 versus the AT4W. They had 5 of the KO3's, they were dead slow and could fit me in so I pulled the trigger.

So far I am quite impressed. People aren't kidding these tires are quiet. I don't even notice any more noise than the stock Toyo. Drove home with the windows down and all I heard was air noise.

You can feel there is more weight for sure since these are E load, but it still drives and rides great. I'll update with some MPG calculations over the next couple of fill ups. Averaging about 20 combined right now.

No rub at full lock forward and reverse. Full spare snugged up no issue.

 

[Beartooth85]

Since I have yet to see a build like this I decided to take the plunge. Absolutely worth it. No rubbing at all with minimal trimming.

Build so far:
3" Readylift SST 2.1 lift
35x12.50r17 Toyo RT trail tires
17x9 0 offset Lock Offroad Baja wheels
Baja Design squadron pro Amber fog lights

Trimming/ work needed
1. Back of front bumper small cut on inside.
2. Push front fender liner forward about an inch and repinned.
3.back of front fender near crash pad trimmed with some rear fender liner.
4. Remove crash pad
5. Good advanced alignment

All in all worth every penny! Feel free to inquire on anything I may have forgot. Hope this helps anyone looking to go big or go home

See full original build thread at: https://www.4runner6g.com/forum/thr...st-2-1-lift-17x9-0mm-offset-wheels-35s.10254/

More pics

 

[Supersonic Red 4runner]

From original thread: https://www.4runner6g.com/forum/thr...d-w-readylift-2-5-sst-trd-pro-upgrades.10275/

2025 Supersonic Red TRD Sport Premium
Readylift 2.5” SST
TRD Pro upper control arms
TRD Pro wheels w/ GoodYear Territory RT 265/70/18

 

[4running]

From this thread -- https://www.4runner6g.com/forum/threads/prerunner-build-on-37s-by-dirt-king.10294/

Prerunner build by Dirt King riding on Advan Racing GT Heavy Duty wheel in Racing Copper Bronze and 37" tires (Toyo Open Country R/T 37x12.50R17 LT). 37's look huge on the 6th gen.

 

[Chris4R]

Suspension / Wheels / Tires

• Wescott Preload Collar Lift Kit (2.5” Front and 0.75” rear)
• Rough Country Extended Flares - Gloss Black
• Custom installed fender markers on front and rear flares
• 18x9 Fuel Rebel 6 D681 Bronze/Black Wheel Fuel Rebel 6 D681 +1 Offset
• 1” spacers - Rear wheels only
• LT275/70R18 Kumho Road Venture AT52 All Terrain Tires

See full mods list and photos at build thread:
https://www.4runner6g.com/forum/threads/black-2026-4runner-limited-build.10304/

 

[Furrypanda1121]

Im getting the 6112/6100 kit installed with dobinson C59-885V springs soon. The fronts will be set at ~2", are extended sway bar end links required for about 1.5in-2in of rear lift? I don't see anyone mentioning they installed them with their lifts

 

[First4Runner]

2026 Sport Premium
Wescott Collar Lift
Black Rhino Diamondback 17” +25 offset
Toyo Open Country A/T III

 

[Dyl]

Modifications:
Toytec Leveling Kit
BFG KO3 285/70R18
Ceramic tint (50% on the windshield, 15% everywhere else)

See original thread:
https://www.4runner6g.com/forum/thr...-kit-285-70r18-bfg-ko3-on-stock-wheels.10386/

 

[viper2788]

2026 ORP
Bronze Method 703 wheels w/ +35 offset
Toyo Open Country 285/70/R17
No lift... yet

 

[clarkdot7]

ARB OME MT64 Suspension Lift Kit (2.5 inches front / 2 inches rear) on 2025 4runner SR5

Finally got around to installing the MT64 lift on the car. A whole day install ordeal but very worth it in the end.

 

[Joestac]

Because I am insane and don't mind spending hours at Discount Tire. I swapped from the KO3s to the Falken AT4Ws. They had to swap out a bad BFG and they still had some slight wobble. Both E load. So figured I'd try something new while able.

The AT4Ws are definitely louder than stock and the KO3's, but even though they are only 3 pounds lighter than the KO3's, the feel like they roll better.

I am still getting a little jitter on the road at random times but I'm thinking that might be just life with an E load tire and this vehicle and suspension.

I went back to the 265 in the AT4Ws when I went up to the 275 in the KO3 because the 265 AT4W is a 33.4" diameter tire. The 275 BFG was 33.1". If I did 265 in the BFG it was like 32.6". Interestingly, the 275 in the AT4W is slightly shorter at like 33.2". I also saved 3 pounds.

Ramble over.

 

[travis]

Got new wheels and tires:

SCS F5 17x8.5 +20 offset
Nitto Terra Grappler G3 285/70/R17

 

[dstewart3377]

Stock vs with 2.5” ready lift. Method 703 wheels. 275/70/17 tires.

Before & After

 

[TexasDirtFarmer]

2.75" front lift with Bilstein 5100 + 6100 rear shocks + 285 AT3 tires + Fuel Off-Road Spur 17” wheels +25 offset

The team at 4 Wheel Parts handled the build — they’ve been my go-to shop for the last three trucks I’ve owned. The setup includes new Fuel Off-Road Spur 17” wheels with a +25 offset, wrapped in Toyo Tires 285 AT3s. Suspension is a 2.75” front lift only using Bilstein 5100 B8 adj. front struts (highest level) and 6100 rears shocks.

Sponsored