Aftermarket Wheels, Bigger Tires, Lift Kits (Compilation) for 2025+ 4Runner 6th Gen -- Add Yours!

[da_sniper01]

Wescott Designs lift
KMC 728 Lobo 17x8.5 +18 offset
Falken Wildpeak AT4W 285/70/17
OK Expedition skidplate

Build thread: https://www.4runner6g.com/forum/threads/my-sr5-underground-build.6783/

Sponsored

 

[Gastan]

295/70/18 Toyo Open Country R/T Pro tires + Westcott collar lift kit on 2025 4Runner TRD Pro

 

[lilgrech2]

Toyo Open Country AT3 LT275/65/18
TRD Pro wheels

See full build thread at: https://www.4runner6g.com/forum/threads/new-member-trd-sport-premium-build.6803/

If photos are copied or used, give Photo credit to @joshuawithacamera (link below)
https://www.instagram.com/joshuawithacamera?igsh=MTR4Ymx3bXNoazBwcQ==

 

[s3lekta]

See original build thread at:
https://www.4runner6g.com/forum/thr...s-25-offset-and-wildpeak-at4w-285-70r17.6768/

Blackhorn Offroad NS5 17“ 8.5 +25.
Falken Wildpeak A/T4W 285/70/17 SL Load. (I originally had C loads, swapped for SL instead - heavy)
Aftermarket TPMS, Wurth, cloned existing by tire shop.
No rub, No lift.
Folded front liner for a bit more clearance.
Slight poke.
Trailhunter mud flaps.

 

[C's6G4RTRDPro]

My TRD Pro with 2" Torq lift level kit and 0 offset 18x9 Pro Comp PA34 Rockwell wheels.

Wanted brushed but worried about winter salt.

I think I'm going to get 285/65's or whatever I can run wider without going much taller. These Toyos look a little small.

 

[Henry]

TRD ORP on stock suspension height
RR7-H Flow Formed wheels +25 offset
Falken Wildpeak AT4W 285/70r17 (C Rated)
No rubbing
Slight poke

 

[TxTrdPro]

UPDATE:

Quick update - just got my BFG KO3 tires mounted tonight. Went with 305/65/18 size to give it a much wider and more aggressive look. It definitely worked! Couldn’t be happier right now.

Here’s some more pics from this morning to show the poke.

ORIGINAL POST (before KO3 tires):

New member out of DFW TX, just got my fiancée a 2025 TRD PRO in black and doing a few things to it to make it stand out. Day 2 we installed the Westcott Designs TRD PRO front & rear level kit on it.

We also installed 1” Spidertrax spacers front & rear to give it a better stance with the factory wheels. We may replace them with a different offset wheel down the road but for now we like the way they look but didn’t want a tucked in look once lifted.

It looks so much better now and had a great stance. Got it aligned and it is now ready for new tires which are getting installed tomorrow!

More pics to to come.

 

[Henry]

TRD ORP on stock suspension height
RR7-H Flow Formed wheels +25 offset
Falken Wildpeak AT4W 285/70r17 (C Rated)
No rubbing
Slight poke

More:

RR7-H Flow Formed wheels +25 offset
Falken Wildpeak AT4W 285/70r17 (C Rated)
TRD ORP on stock suspension height
No rubbing
Slight poke

 

[PatJc]

- 285/70/R17 Falken Wildpeak AT4W C-Load
- Blackhorn NS5 Coyote wheels (+25 offset)
- RC Rough Country 1.5" Level kit
- Husky Liner low pro visor

 

[papadop88]

TRD Pro
Stock Pro Wheels (18x8.5 +20)
295/70/18 Nitto Recon Grapplers in Standard Load (53lbs per tire)
Westcott Designs TRD Pro Lift Kit (Did not install 1" Top Hats in the front)

Slight poke, zero rub, even with the stock ride height.

I will be going up to a full 35x12.5x18 tire (might drop down to a 17" wheel and tire though) for a wider stance.

My numbers (measured from bottom of rim to bottom of fender):

• Driver Front: 30.88" | 32.25" (1.37" lift)
• Driver Rear: 31.75" | 32.62" (0.87" lift)
• Pass Front: 30.88" | 32.62" (1.74" lift)
• Pass Rear: 32.00" | 32.80". (0.80" lift)

Full Build Thread Here Answers All Questions

 

[Yoosuhhh]

Is there anyone in here running A 0 offset wheel on 35's? If so I would deff like to see how it looks

 

[papadop88]

Is there anyone in here running A 0 offset wheel on 35's? If so I would deff like to see how it looks

TxTrdPro shown above, running 18x8.5 +20 Stock Pro wheels with 12" wide KO3s. While not exactly a 0 offset on true 35s (12.5" wide), it will give you an almost exact look on a Pro. If you have a different trim that doesn't have the wider fender flares, then it will look even more pronounced, and you'll be cutting ALOT to get them to fit. The look of that stance is going to be a whole other discussion.

 

[Gastan]

Is there anyone in here running A 0 offset wheel on 35's? If so I would deff like to see how it looks

Here's a few 0 offset with 35" tires.

https://www.4runner6g.com/forum/thr...llar-level-kit-method-305-bronze-wheels.3044/ (by @cuhhhris)

https://www.4runner6g.com/forum/threads/binx-the-4runner.6344/ (by @alpa_chino)

https://www.4runner6g.com/forum/thr...els-17x8-5-0-offset-and-305-70-17-toyos.3498/ (by @Vlad23i)

https://www.4runner6g.com/forum/thr...t-0-offset-westcott-pre-collar-lift-kit.4410/ (by @Vlad23i)

 

[pmarohl]

Stock Trailhunter on 35x12.5 tires (Micky Thompson Baja Boss).

Removed crash plates and no rubbing. Full stock setup, and wheels.

 

[DangItsDen]

Toyo AT3 285/70r17 Load C
Method 703 +35 mm offset
Peak Suspension 1.25" front level

Sponsored