OEM Bilstein shocks part numbers (red Bilsteins with remote reservoirs) from 2025+ TRD Off-Road 6th Gen

[PierceVonCloud]

...coming from a set of King 2.5s on my 3G Tacoma, I promised myself I wouldn’t go down that road again unless I truly needed that level of suspension. That’s a lot of money just to get a lift when the truck spends its life on pavement.

I agree. I really didn't want to resort to an aftermarket suspension just to make my already expensive truck have a decent ride on certain roads. The Fox 2.5 rear shocks were $347 each and I installed them myself. They have OEM-style isolation at the mounting points and a boot to protect the shaft. The front Bilsteins are still on, contributing a tolerable amount of "jitteryness" on those roads, but it was the rear Bilsteins that really had to be swapped out. Other 6G owners are trying shocks from different trims or from Lexus models with uninspiring results. I'm glad I got rid of the majority of the jitters without breaking the bank.

Sponsored

 

[TurboGuy2000]

I just removed the rear Red Bilsteins from my hybrid OR and put on Fox 2.5 shocks. I think Bilsteins are great, but for whatever reason the damping behavior of the factory rear Bilsteins (and perhaps other 6th gen trim rear shocks) is very, very wrong. The car is totally different with the Fox's. To me the 6th Gen OEM Bilsteins aren't worth the cost of the red paint that they are covered with.

let me get em? lol

 

[PierceVonCloud]

let me get em? lol

I know about a bridge in Jersey that I could sell you at a really good price. It's a great deal, trust me. But I couldn't, in good conscience, sell my 6G Red Bilsteins to anybody.

 

[porkyfly]

ill sell mine for $50 a pop, local pickup near dc

 

[Striker53]

I just removed the rear Red Bilsteins from my hybrid OR and put on Fox 2.5 shocks. I think Bilsteins are great, but for whatever reason the damping behavior of the factory rear Bilsteins (and perhaps other 6th gen trim rear shocks) is very, very wrong. The car is totally different with the Fox's. To me the 6th Gen OEM Bilsteins aren't worth the cost of the red paint that they are covered with.

DID YOU NOTICE A BIG CHANGE? I WOULD LIKE A BETTER RIDE AND I HAVE THE BILSTENS

 

[PierceVonCloud]

DID YOU NOTICE A BIG CHANGE? I WOULD LIKE A BETTER RIDE AND I HAVE THE BILSTENS

You will definitely notice a change with just getting rid of the rear OEM Bilstein shocks, but it won't solve the whole problem. From the factory , the 6th Gen Off Road has the worst possible ride - it is overdamped AND oversprung. By that I mean the springs are far too stiff and the fast compression damping is too stiff for the springs. It seems like all the trims tend this way judging from all the complaints on the internet. On the complete opposite end of the spectrum is the 5th Gen, which was properly damped (IMO) and slightly undersprung which results in a very comfortable and compliant ride. Even with the Fox 2.5 rear shocks on my 6G, it feels like I'm sitting on a giant spring on certain roads. To fix the whole problem you need new coilovers in the front (Fox, King, etc) and new shocks in the back AND new rear springs. Hybrid owners could swap in non-hybrid springs (48231-35410) or the Icon Progressive rear springs. I know what front coilovers I'm getting, but I haven't decided on rear springs yet. I even tow a 4000 pound camper and I'm not worried about switching to "non-hybrid" rear springs. My 5th Gen handled the 450 pound tongue weight from the camper just fine and I bet the 5th Gen rear springs are way softer than a 6th Gen SR5 rear spring.

 

[Nono]

Instead of trying to find a set of takeoffs, I decided to head to my local dealership and order a set of TRD Off Road shocks (red Bilsteins with remote reservoirs).

Front shock
48510-8Z696

Rear shock
48530-8Z321

List price for the front is $213.09 each and $123.85 each. for the rear. I paid $193.72 each for the front and $82.39 each for the rear, bringing the total to $552.22. The fronts will come with a spring isolator and a new nut. Rears will come with a new nut and boots already installed. You'll have to use the the existing mount for the front and existing bushings for the rear.

If you want to build up the fronts and not deal with spring compressors, you'll need two 48609-60120s, which are the upper shock mounts. List price for those are $232.86 each.

So, there you have it! I'll be ordering the @alldogsoffroad Alldogs Spacer Eraser kit to pair with this soon.

EDIT: I checked the parts on Lakeland Toyota's online parts catalog. You can get the fronts for $137.42, the rears for $58.98, and the front mounts for $165.19.

Do you know if the bushings from the SR5 work in the red bilsteins? Just picket us a set of takeoffs and it doesn’t have the bushings or nut. Thanks! I’m doing the same spacer eraser m

 

[alldogsoffroad]

Do you know if the bushings from the SR5 work in the red bilsteins? Just picket us a set of takeoffs and it doesn’t have the bushings or nut. Thanks! I’m doing the same spacer eraser m

Not sure unfortunately

Sponsored