Can’t install OEM rock rails because no threaded holes in the frame

[onateacd]

Yup. Bizarre. I ordered blind bolts and will give them a try. There are some threaded holes but most are not.

Sponsored

 

[jdgreen]

The following video verifies that blind bolts can be removed although I can see how things might not go as planned if the locking anchor failed to retract into the bolt.

Blind Bolt installation and removal guide

 

[gardner2303]

Just spent 2 hours at my local Toyota dealership and didn't make any progress. They looked up the OEM rail compatibility and told me that the TRD Sport was not on that list (attached). Not sure how the SR5 is but the TRD Sport & Off Road isn't.. Finally got a hold of a person at CBI who is sending over a warranty claim form to have them send out a new hardware kit they are preparing for this issue they are now becoming aware of

 

[onateacd]

Interesting. What more can you share about this hardware kit? Is there a timeline?

 

[gardner2303]

Interesting. What more can you share about this hardware kit? Is there a timeline?

I wasn't given any details on what would be included or the timeline. All he could say is they are working on a solution. Was emailed the following link to fill out to submit my request

https://cbioffroadfab.com/warranty/

 

[Rellims]

When you order Westcott they now have an hardware option.

 

[DangItsDen]

So did anyone have success mounting the OEM rock rails using an aftermarket blind bolt solution? I am about to pull the trigger on these OEM rails bc there's a sale.

 

[onateacd]

Yup. Used 1/4 box bolts and they worked perfectly.

 

[AdFour]

How can we be certain that blind/box bolts are rated for the load? Has it been tested or at least analyzed? The stress on the frame is non uniform with the blind bolt and thats the opposite of what you'd want.

For a non-structural part I wouldn't care but for this, I'd want some proof first before I tear up the frame. Toyota needs to address this issue, anyone hear any news on this end?

 

[LARIN]

I guess Toyota figured no one would take a 60k plus vehicle and drag the frame on top of boulders on a trail,

 

[ropdykex11]

Yup. Used 1/4 box bolts and they worked perfectly.

How many total did you use? 6 per side, along with 2 OEM bolts for the threaded holes?

Sponsored