What did you do to your 6th Gen 4Runner today?? 👨🏻‍🔧 🧰 🛠

[js_panda_rnr]

This weekend's upgrades:

• Amber fog light lenses from @StickerFab
• OEM cargo area lights
• OEM Land Cruiser LC250 front skid plate

Sponsored

 

[kburrito]

Added red inserts from TufSkinz. Wanted something to pop instead of the black lettering that came with it

 

[SummitSeeker]

This weekend's upgrades:

• Amber fog light lenses from @StickerFab
• OEM cargo area lights
• OEM Land Cruiser LC250 front skid plate

I need the cargo lights. Any info?

 

[js_panda_rnr]

I need the cargo lights. Any info?

Part number PT944-89260-C0

There's also a post with more info here: https://www.4runner6g.com/forum/thr...all-6th-gen-orp-diy-instructions-photos.8519/

 

[Todd_Limited]

And now I need a set. Smh. Would you all recommend getting 5 and selling my TRD upgrade wheels as a set of 5, or just doing 4 and 4?

I'm wanting some mudguards for my Limited Hybrid, is there any reason you (or anyone for that matter) would think they wouldn't work for me? I do have the 20"Nitto Ridge Grapplers.

 

[Administrator]

Let's see what you've done to your 4runner today / lately ?‍

 

[BonRunner]

Got some vinyl decals to fill in on the letters lift gate...

Also, got my custom plate in

 

[horbit]

Installed the rear camera for my FitcamX.

 

[BonRunner]

Installed the rear camera for my FitcamX.

I put that mount & rear cam on the passenger side. Because when the rear window is dirty (like this) you won't see anything!

 

[horbit]

I put that mount & rear cam on the passenger side. Because when the rear window is dirty (like this) you won't see anything!

Good idea, there is enough slack to move it over. Thanks for the heads up.

 

[Flexte]

Installed the rear camera for my FitcamX.

Do you have a video on how you ran the wires?

 

[horbit]

Do you have a video on how you ran the wires?

I do not, sorry. I ran it on the driver side of the roof. Had to loosen or remove all the plastic trim and pull down the door gaskets on the drivers side. There is just enough room to run the cable behind\above the side curtain airbag. It took a while using a flashlight to see how everything was attached as I used pry tools.

 

[Flexte]

I do not, sorry. I ran it on the driver side of the roof. Had to loosen or remove all the plastic trim and pull down the door gaskets on the drivers side. There is just enough room to run the cable behind\above the side curtain airbag. It took a while using a flashlight to see how everything was attached as I used pry tools.

I wouldn't dare try it without a tutorial. good work.

 

[VB4Runner]

I ran rear dash cam wiring straight back using wall fish tape. Inserted it into the headliner from the tailgate and it came out near the driver’s visor. Pulling the cable back, it seemed to get hung up on something about halfway across, but it didn’t take much to work it free and pulled all the way back. It took less than 10 min total and required no removal of any trim pieces.

 

[horbit]

I ran rear dash cam wiring straight back using wall fish tape. Inserted it into the headliner from the tailgate and it came out near the driver’s visor. Pulling the cable back, it seemed to get hung up on something about halfway across, but it didn’t take much to work it free and pulled all the way back. It took less than 10 min total and required no removal of any trim pieces.

I have fish tape and would have done it this way if I didn't have the sunroof, there was not much room and a lot of roof geometry. I'm sure if I did that method it would have taken less time overall and less risk or breaking plastic pins on the trim parts.

Sponsored