What did you do to your 6th Gen 4Runner today?? 👨🏻‍🔧 🧰 🛠

[Gerardo]

New tires on stock 20" . Cooper Discoverer Road & Trail AT 275/60/20.

@BonRunner Top-notch photography.

Sponsored

 

[abstraakt]

1st time 4Runner owner, but a huge fan since the 1st gen came out. Just installed the Sxth Engineering cold air intake and so far, so good.

 

[RunnerRocks]

I have the same Toyo 275 E-load tires in 17in and really like them, but I didn’t get a 5th spare. How manageable is it to replace the spare and does it look weird at all when mounted? Just curious.

As a sidenote (from both experience and speaking with Toyota tech) these E loads need balancing more often. I’ve already put over 5k miles on them but needed a balance at 4k miles.

Thanks for the tip on rebalancing.

What PSI are you using ?

We had these same Toyo's for 5+ years on our 2020 Ranger in E-load LT265/70 R17. Traded our Ranger in for our 2026 ORP. Win!

Our ORP came with four optional black 18" wheels (PIO) and a full-sized spare that had the original 18" silver ring wheel. I won't do 5-tire rotations and left the mismatched spare wheel, but the tires all match.

Replacing the spare tire is easy... for Discount Tire! I lowered the spare onto my creeper dolly, rolled it out, then put it inside the cargo area so DT didn't have to lower & raise it. I rechecked the pressure, then reinstalled the spare myself. The chain hoist is smooth and easy to use. I found that while nearing the top, need to rock & wiggle the spare around to make sure it's fully seated in the forward brackets.

Several here have 285 spares. Our LT275/70 R18 spare looks to be the max size to fit up in there.

View from the back...

 

[Wikaa]

Power was out all day due to the atmospheric river, but I made it out to get some Nitto Terra Grapplers installed on my Limited!

Went with 265/60R20 to ~match the 32.5” dimensions of the OEM 18 inch trims.

Also ordered a 5th limited wheel (PN 42611-35680) so I can replace the steelie with an identical spare and do 5-wheel rotations.

Will also be receiving the Lasfit rear seat back protectors here momentarily to complement my OEM all-weather mats everywhere else.

Interesting, Nice wheels btw

 

[croome21]

Thanks for the tip on rebalancing.

What PSI are you using ?

We had these same Toyo's for 5+ years on our 2020 Ranger in E-load LT265/70 R17. Traded our Ranger in for our 2026 ORP. Win!

Our ORP came with four optional black 18" wheels (PIO) and a full-sized spare that had the original 18" silver ring wheel. I won't do 5-tire rotations and left the mismatched spare wheel, but the tires all match.

Replacing the spare tire is easy... for Discount Tire! I lowered the spare onto my creeper dolly, rolled it out, then put it inside the cargo area so DT didn't have to lower & raise it. I rechecked the pressure, then reinstalled the spare myself. The chain hoist is smooth and easy to use. I found that while nearing the top, need to rock & wiggle the spare around to make sure it's fully seated in the forward brackets.

Several here have 285 spares. Our LT275/70 R18 spare looks to be the max size to fit up in there.

View from the back...

Thanks for this! I’m running around 32 PSI

 

[Administrator]

Let's see what you've done to your 4runner today / lately ?‍

 

[BonRunner]

Cali Raised Ditch Lights installed. 27W with side-projecting LEDs. Love it so far! Very bright at night and helped with peripheral views to watch out for wildlife! I have adjusted them to be at 10 & 2 o'clock position with slight tilted down.

The pods have slots for amber lens attachment that I may get in the future.

 

[Voltron]

 

[Joestac]

Some serious wrench time tonight.

Sadly, my AJT start button ring showed up damaged and they are sending another one.

 

[Cledope]

Can you tell me please where you got that bracket for the aux beam?!

 

[Archer]

Cali Raised Ditch Lights installed. 27W with side-projecting LEDs. Love it so far! Very bright at night and helped with peripheral views to watch out for wildlife! I have adjusted them to be at 10 & 2 o'clock position with slight tilted down.

The pods have slots for amber lens attachment that I may get in the future.

RIGID makes amber and solid black covers that snap onto the caliraised ditch lights.


.

 

[FamousForNothing]

Installed the Dark Chrome Lighted Emblem today. Super easy install and looks great!
Part Number: PT413-89250

 

[TrdProGirl84]

Husky Rain Guards

 

[VB4Runner]

Raptor lights and then a day cruising the blue ridge parkway

 

[Archer]

Took it out for a run in some snow.

Sponsored