OEM Illuminated Front Emblem: Dark Chrome w/ Light Up LED installed [+ part number / price]

[ToYoDaMan]

Guessing its since your in CA and so is that dealer. Wonder if you tried at a different dealer out of state of CA like https://autoparts.klamathfallstoyota.com/ if you will get it lower w/o tax.

Better. Now under $140. Tempted. Still a few hours left before the sale ends.

Sponsored

 

[Ahmad310]

Better. Now under $140. Tempted. Still a few hours left before the sale ends.

Find some other products and get them while on sale. Hard to beat! I picked up the emblem, the gloss black rear overlay, the side compartment multi tool and the OEM TRD Pro Mudflaps (for when i put bigger tires)

 

[beaninno]

I watched the video on youtube from Yoti Expedition to install and was taking off panels above the radiator then feeding thru the grill. It looks like I can’t do that bc there is a louver system there and feeding wire thru would block it from closing. How did you do it ?

 

[Ahmad310]

I watched the video on youtube from Yoti Expedition to install and was taking off panels above the radiator then feeding thru the grill. It looks like I can’t do that bc there is a louver system there and feeding wire thru would block it from closing. How did you do it ?

I followed the Toyota directions found here https://toyotaparts.sparkstoyota.com/install/PT413-89251inst.pdf

 

[beaninno]

I followed the Toyota directions found here https://toyotaparts.sparkstoyota.com/install/PT413-89251inst.pdf

Thanks for installation instructions. There were none in the box. Still not seeing where to feed the wire thru to the front grill. I’d don’t see any openings above the louvers.

 

[TMLifer]

Thanks for installation instructions. There were none in the box. Still not seeing where to feed the wire thru to the front grill. I’d don’t see any openings above the louvers.

Hopefully you have since found the small gap where to feed the harness through. But, if you haven't, I'll try to describe the location. It's definitely a tight (small) gap that I had to finesse the harness and connector through. If you reference Toyota's instructions from the link that @Ahmad310 provided, it is Step 17 on page 6. The gap is located underneath the black tab (left of the hood latch if you're facing the front of the car) at the top of louver system.

 

[beaninno]

Hopefully you have since found the small gap where to feed the harness through. But, if you haven't, I'll try to describe the location. It's definitely a tight (small) gap that I had to finesse the harness and connector through. If you reference Toyota's instructions from the link that @Ahmad310 provided, it is Step 17 on page 6. The gap is located underneath the black tab (left of the hood latch if you're facing the front of the car) at the top of louver system.

Hopefully you have since found the small gap where to feed the harness through. But, if you haven't, I'll try to describe the location. It's definitely a tight (small) gap that I had to finesse the harness and connector through. If you reference Toyota's instructions from the link that @Ahmad310 provided, it is Step 17 on page 6. The gap is located underneath the black tab (left of the hood latch if you're facing the front of the car) at the top of louver system.

Thanks ! Going to work on it this weekend! That info will help alot.

 

[Vincenzo]

Why Toyota chose to put a Prius emblem on the 4 Runner. I chose to go this route

Sponsored