OEM Illuminated Front Emblem: Dark Chrome w/ Light Up LED installed [+ part number / price]

[ToYoDaMan]

Guessing its since your in CA and so is that dealer. Wonder if you tried at a different dealer out of state of CA like https://autoparts.klamathfallstoyota.com/ if you will get it lower w/o tax.

Better. Now under $140. Tempted. Still a few hours left before the sale ends.

Sponsored

 

[Ahmad310]

Better. Now under $140. Tempted. Still a few hours left before the sale ends.

Find some other products and get them while on sale. Hard to beat! I picked up the emblem, the gloss black rear overlay, the side compartment multi tool and the OEM TRD Pro Mudflaps (for when i put bigger tires)

 

[beaninno]

I watched the video on youtube from Yoti Expedition to install and was taking off panels above the radiator then feeding thru the grill. It looks like I can’t do that bc there is a louver system there and feeding wire thru would block it from closing. How did you do it ?

 

[Ahmad310]

I watched the video on youtube from Yoti Expedition to install and was taking off panels above the radiator then feeding thru the grill. It looks like I can’t do that bc there is a louver system there and feeding wire thru would block it from closing. How did you do it ?

I followed the Toyota directions found here https://toyotaparts.sparkstoyota.com/install/PT413-89251inst.pdf

 

[beaninno]

I followed the Toyota directions found here https://toyotaparts.sparkstoyota.com/install/PT413-89251inst.pdf

Thanks for installation instructions. There were none in the box. Still not seeing where to feed the wire thru to the front grill. I’d don’t see any openings above the louvers.

 

[TMLifer]

Thanks for installation instructions. There were none in the box. Still not seeing where to feed the wire thru to the front grill. I’d don’t see any openings above the louvers.

Hopefully you have since found the small gap where to feed the harness through. But, if you haven't, I'll try to describe the location. It's definitely a tight (small) gap that I had to finesse the harness and connector through. If you reference Toyota's instructions from the link that @Ahmad310 provided, it is Step 17 on page 6. The gap is located underneath the black tab (left of the hood latch if you're facing the front of the car) at the top of louver system.

 

[beaninno]

Hopefully you have since found the small gap where to feed the harness through. But, if you haven't, I'll try to describe the location. It's definitely a tight (small) gap that I had to finesse the harness and connector through. If you reference Toyota's instructions from the link that @Ahmad310 provided, it is Step 17 on page 6. The gap is located underneath the black tab (left of the hood latch if you're facing the front of the car) at the top of louver system.

Hopefully you have since found the small gap where to feed the harness through. But, if you haven't, I'll try to describe the location. It's definitely a tight (small) gap that I had to finesse the harness and connector through. If you reference Toyota's instructions from the link that @Ahmad310 provided, it is Step 17 on page 6. The gap is located underneath the black tab (left of the hood latch if you're facing the front of the car) at the top of louver system.

Thanks ! Going to work on it this weekend! That info will help alot.

 

[Vincenzo]

Why Toyota chose to put a Prius emblem on the 4 Runner. I chose to go this route

 

[bigbruse]

First mod, replacing the front chrome Toyota emblem with a smoked out dark chrome light up one.

Toyota OEM part name and part number:

Illuminated Front Emblem: Dark Chrome
Part number PT413-89250
$185 MSRP

First mod, replacing the front chrome Toyota emblem with a smoked out dark chrome light up one.

Toyota OEM part name and part number:

Illuminated Front Emblem: Dark Chrome
Part number PT413-89250
$185 MSRP

How hard was it ? Do you have to take off the grill? I already have the illumination. Mine is the chrome. I just want to switch out to the black one.

 

[TMLifer]

How hard was it ? Do you have to take off the grill? I already have the illumination. Mine is the chrome. I just want to switch out to the black one.

Installation wasn't difficult. But your case will be a little different. Your wiring for the illuminated emblem is already in-place. All you have to do is remove your existing illuminated chrome emblem. I had originally had a regular emblem installed when I purchased my vehicle, so it was easy to remove because the original, non-illuminated emblem had voids which allowed me to stick my finger through and behind the emblem to unclip the tabs holding it in-place. In your case, your existing emblem is an illuminated emblem which is a solid emblem without any voids. There's not much online information or videos about how to remove the illuminated emblem because I think it's so new. I haven't tried looking yet, but you might be able to unclip the tabs on the illuminated emblem from the back side of the emblem without removing the grille.

 

[TMLifer]

Thanks ! Going to work on it this weekend! That info will help alot.

How did your installation go?

 

[beaninno]

How did your installation go?

Thanks for checking back. After got the paper print out and ya'll input, it was easy.

I pull up on that grill tab on top alittle and fit plug through it.

I appreciate all ya'll help. Thank You!!

Happy Mardi Gras!

 

[ctreble]

For your raptor lights do you think you can tap into the illuminated emblem for power instead of fuse box? Or maybe just get another harness PT413-89250-AC from dealer and plug in play the other light for raptor light power?

Sponsored