What did you do to your 6th Gen 4Runner today?? 👨🏻‍🔧 🧰 🛠

[JU235]

Installed the SXTH intake today. EZ peazy lemon squeezy. Sounds great.

Sponsored

 

[BonRunner]

Wired an 8-gang switch panel on the fuse box for my Baja Designs 2.0 Squadron Sport ditch lgihts.

 

[ThatSickRIp]

Wired an 8-gang switch panel on the fuse box for my Baja Designs 2.0 Squadron Sport ditch lgihts.

Did you fuse tap into the fuse panel or just pull power from the battery?

 

[ThatSickRIp]

Scratch that, just saw your other post. Thanks man!

 

[BonRunner]

Did you fuse tap into the fuse panel or just pull power from the battery?

Some switch panel only allow power on via ACC fuse. This switch panel has dual mode that you can select, either battery or ACC.

 

[Rrditch]

Installed Dobinsons rear springs got some suspension back

 

[josiahg52]

Verified the transmission fluid level and it was satisfactory.

 

[3rdRunner]

Well not today specifically, but over the last couple weeks:
Added RCI skid plates to trailing arm/shock mounts, a-arm and lower link. Swapped out open system ADD winch hook to Factor 55 Ultra Hook, replaced Westcott weather strip with Edge Lock + 3/8 Top Bulb and installed the rear Durobump DBRTOY4 just to keep the rear tires from contacting the fender well coming off obstacles- a little insurance for the Fender Flares.

 

[Administrator]

Let's see what you've done to your 4runner today / lately ?‍

Sponsored