Glove box latches to cure rattle (3D print)

[brumey]

Thanks. I will take a look.

Sponsored

 

[Gagi]

Thanks for sharing this!

Measured the 2026 Trailhunter hybrid it’s 13x13mm.
Thanks for the file.

 

[Gagi]

Measured the 2026 Trailhunter hybrid it’s 13x13mm.
Thanks for the file.

Fitted perfectly. Nice and snug!
Thanks again.

 

[bkw777]

That print looks really good. What printer do you have?

 

[Vincenzo]

This is how I corrected it. The two spring loaded plungers on each side got upgraded to a stiffer spring. I tried stretching them first, but, made no difference. They actually went back to their original length. I then added the rubber bumpers. No more plastic on plastic violence when you close it. It worked out fantastic.

 

[Gagi]

That print looks really good. What printer do you have?

Ender 3. I printed with ABS highest quality
And used the first design provided by the member. The fancy one was breaking.

 

[bkw777]

Ender 3. I printed with ABS highest quality
And used the first design provided by the member. The fancy one was breaking.

Well I mean I did write right in the readme:

"This version is probably not good to print at home on a normal FDM printer because the tabs will likely break off.
So this is really only for getting commercially printed using SLS or MJF."

The default version is designed for FDM.

 

[bkw777]

This is how I corrected it. The two spring loaded plungers on each side got upgraded to a stiffer spring. I tried stretching them first, but, made no difference. They actually went back to their original length. I then added the rubber bumpers. No more plastic on plastic violence when you close it. It worked out fantastic.

This is great. Thanks for the recipe.

 

[Van Solo]

This is how I corrected it. The two spring loaded plungers on each side got upgraded to a stiffer spring. I tried stretching them first, but, made no difference. They actually went back to their original length. I then added the rubber bumpers. No more plastic on plastic violence when you close it. It worked out fantastic.

What parts and from where please your solution is my preferred style.

 

[Gagi]

Well I mean I did write right in the readme:

"This version is probably not good to print at home on a normal FDM printer because the tabs will likely break off.
So this is really only for getting commercially printed using SLS or MJF."

The default version is designed for FDM.

Yeah no blame’s only big thanks.

 

[Minnesota4Runner]

The Lifestyle ones dont fit my Gen6. I will need to look closer and use a file probably.

 

[Joestac]

The Lifestyle ones dont fit my Gen6. I will need to look closer and use a file probably.

Did you not get 4 of them? 2 should be different sizes. Was checking all the reviews on these before ordering.

 

[mcd_ovrlnd]

Stickerfab now has a fix out for this as well. $13.

https://www.stickerfab.com/products/loose-glove-box-fix-2024-tacoma-2025-4runner?keyword=glove box

 

[Joestac]

Stickerfab now has a fix out for this as well. $13.

https://www.stickerfab.com/products/loose-glove-box-fix-2024-tacoma-2025-4runner?keyword=glove box

No accounting for taste in their cancerous pop-up hell ridden site. Nice to have options though. 4Runner Lifestyle ones look a bit more polished. These look on par with what OP posted. Probably stole his file and started selling them.

 

[mcd_ovrlnd]

4Runner Lifestyle product sold out at the moment.

Sponsored