What does your gauge cluster look like? Post pics of your configuration!

[boblupo]

After driving my TRD ORP since September 2025, I feel like I finally settled on configurations for the 3 screens available. I'm curious what others have found to be the most convenient and informative display configuration as well. Let's post our favorite configurations!

I found that the single guage gives room for the most additional info on the sides vs the dual gauge setup. I have a page for daily driving with economy info, a page with drivetrain & tire monitoring, and a page for offroading (inclinometers & traction - although I still haven't see the traction display do anything other than show 4 tires, unless it shows info while I'm more focused looking out the window).

In order to get some of these additional panels, I had to go deep into configuration to enable all panels for all sections, just to make them available to turn on.

Sponsored

 

[NotApplicable]

Wait... maybe I need to use the single dial view. I haven't even explored that yet!

 

[boblupo]

Wait... maybe I need to use the single dial view. I haven't even explored that yet!

I stumbled on it... since the speedo is in the tach, I liked having the extra space. I'm not a fan of the limited choices for the center display, so I keep it blank and let it use that space for pop-up notifications.

 

[NotApplicable]

I stumbled on it... since the speedo is in the tach, I liked having the extra space. I'm not a fan of the limited choices for the center display, so I keep it blank and let it use that space for pop-up notifications.

Yeah, it looks like it gives you more room for temperature gauges on the left and right than my 2-dial setup does...

 

[RunnerRocks]

Thanks for sharing this!

Recently I saw a pic of a single-dial layout, but assumed it was a different trim. The default two-dial layout looks nice, but a single-dial looks more useful while displaying more widgets. I never use the speedo dial, so it makes more sense to have the tach dial and digital speed together in the center.

Would be nice to have something more useful in the center. I just leave the SETUP gear thingy there.

 

[doubleosullivan]

I like the single gage! Lots of info with a clean look

 

[Nodak]

this is what i run for my 1, 2, 3 display

in order.

1 is my primary everyday screen,
2 is to check tire psi,
3 is for towing (see trans/oil temp) and to see H4L engagement (if i have to during winter roads)

and for those wondering, i have most of my nannies turned off, thats why the op screens show those on and mine doesnt. also it helps if you put it into constant cruise control mode instead of adaptive


and for those wondering the icon is showing i turned off PKSB for the winter (so it doesnt freeze solid after i park it)

 

[deeda]

After driving my TRD ORP since September 2025, I feel like I finally settled on configurations for the 3 screens available. I'm curious what others have found to be the most convenient and informative display configuration as well. Let's post our favorite configurations!

I found that the single guage gives room for the most additional info on the sides vs the dual gauge setup. I have a page for daily driving with economy info, a page with drivetrain & tire monitoring, and a page for offroading (inclinometers & traction - although I still haven't see the traction display do anything other than show 4 tires, unless it shows info while I'm more focused looking out the window).

In order to get some of these additional panels, I had to go deep into configuration to enable all panels for all sections, just to make them available to turn on.

How do you switch to the single dial view??

 

[Yoosuhhh]

How do you guys even get it to show the single cluster?! Ive went through every setting and cant seem to find it. Someone please enlighten me.

 

[Nodak]

change the meter display in settings

 

[Yoosuhhh]

change the meter display in settings

Thank you!

 

[deeda]

change the meter display in settings

What part of the settings

 

[Gerardo]

What part of the settings

Settings > Meter Settings > Meter Type

 

[Nodak]

i guess no one reads the manual

i read it several times and still find new stuff, but then again i had months to go over the manual before i even drove the 4R

 

[Yoosuhhh]

Settings > Meter Settings > Meter Type

Thank you! Im going to go check it out now!!!

Sponsored