Need Part Numbers for the Bump Stop Tower that will work on the 6th Gen

[FloridaPhotog]

I've seen that the bump stop towers for another model are compatable with the 6th Gen 4 Runner. Does anyone happed to know the parts numbers?

Sponsored

 

[3rdRunner]

I've seen that the bump stop towers for another model are compatable with the 6th Gen 4 Runner. Does anyone happed to know the parts numbers?

Part numbers:
Driver Side: 51604-60060
Passenger Side: 51603-60060
Frame Bolts (6): 91674-N1030
These are for either LC250 or GX550. We have the same frame, TNGA-F, and they bolt on to threaded holes directly above LCA - 2 on the side, 1 on the bottom of frame.

 

[Fishing]

Does: Driver Side: 51604-60060, Passenger Side: 51603-60060 come with the rubber stop? or only the bracket? Thanks

Part numbers:
Driver Side: 51604-60060
Passenger Side: 51603-60060
Frame Bolts (6): 91674-N1030
These are for either LC250 or GX550. We have the same frame, TNGA-F, and they bolt on to threaded holes directly above LCA - 2 on the side, 1 on the bottom of frame.

 

[js_panda_rnr]

Does: Driver Side: 51604-60060, Passenger Side: 51603-60060 come with the rubber stop? or only the bracket? Thanks

Pretty sure it's just the bracket.

Edit: This post has additional info https://www.4runner6g.com/forum/thr...ets-from-lc250-gx550-are-direct-bolt-on.7988/

Looks like the OEM tower might come with a bump stop but not the one pictured above?

 

[shine]

How much (if any) up travel does this bump stop take away?

 

[3rdRunner]

Does: Driver Side: 51604-60060, Passenger Side: 51603-60060 come with the rubber stop? or only the bracket? Thanks

Just the brackets. You’ll need (6) frame bolts as well 91674-N1030. I used Durobumps - DBF17T. You can get them from Durobump (I know…duh) or I got them from SRQ Fabrication - they had some in stock.

Sponsored