Grab handle for passenger side A-pillar -- 3D printed my own!

[fvlewg65]

Decided to 3D print my own grab handle!

Sponsored

 

[Nodak]

give toyota a few years and they will put a proper handle in that spot hopefully and we can retrofit one.

 

[calvincartier]

Decided to 3D print my own grab handle!

I think it looks pretty good. You can easily re-designed it to make it perfect. Now at least you know it is possible. I just finished to installed anchor points and planning out for the driver side. I am waiting for my handle bar and install it. It will be install directly into the A pillar metal frame, not the plastic trim. It still allows me to keep OEM A Pillar plastic trim perfectly.

 

[calvincartier]

give toyota a few years and they will put a proper handle in that spot hopefully and we can retrofit one.

Just answer your questions about this over the other post. I am waiting for my handle bar to come and install it.

 

[Nodak]

I think it looks pretty good. You can easily re-designed it to make it perfect. Now at least you know it is possible. I just finished to installed anchor points and planning out for the driver side. I am waiting for my handle bar and install it. It will be install directly into the A pillar metal frame, not the plastic trim. It still allows me to keep OEM A Pillar plastic trim perfectly.

for some its has to look oem, others its good enough. personally, i could care less, i rarely use the passenger seat as it is and 90-95% of the time its just me in the vehicle.

heck i dont even use the handle in the 23 tundra, i always use the steering wheel since i dont know when.

at least i know the position of the steering wheel will always be at an ideal height and easy to grab vs the 1 googol (or if you want the long version of 10 duotrigintillion) of grab handles ever made

Sponsored