- Joined
- Mar 27, 2026
- Threads
- 1
- Messages
- 3
- Reaction score
- 4
- Location
- Costa Rica
- Vehicle(s)
- 2025 4Runner SR5
- Thread starter
- #1
Hello,
The vehicle has 7,000 miles and is showing code P0015 – Camshaft Position Timing Over-Retarded (Bank 1) on a 2025 Toyota 4Runner SR5.
The Toyota dealer performed full diagnostics but was unable to identify the issue or replicate the fault. The problem has occurred four times over approximately 1,200 miles.
When it happens, the vehicle goes into limp mode, triggers the check engine light, and disables all safety sensors. Resetting the system by disconnecting the battery temporarily resolves the issue, but the last occurrence returned after approximately 120 miles.
Has anyone experienced this issue before? Any suggestions or guidance?
Thanks!
The vehicle has 7,000 miles and is showing code P0015 – Camshaft Position Timing Over-Retarded (Bank 1) on a 2025 Toyota 4Runner SR5.
The Toyota dealer performed full diagnostics but was unable to identify the issue or replicate the fault. The problem has occurred four times over approximately 1,200 miles.
When it happens, the vehicle goes into limp mode, triggers the check engine light, and disables all safety sensors. Resetting the system by disconnecting the battery temporarily resolves the issue, but the last occurrence returned after approximately 120 miles.
Has anyone experienced this issue before? Any suggestions or guidance?
Thanks!
Sponsored