Silver SR5 (7 seater) Build- Bilstein 6112 / 6100, Westcott Designs rear pucks, Method 703 +35 offset, 285/75R17 BFG KO3

[BlueFinTunaGuy]

So after a month of having my 4Runner and reading about everyone's awesome builds. I planned out a build

Build
- 2026 SR5 (7 seater) in Cutting Edge
- Removed Air Dam
- Bilstein 6112's at circlip setting (#3) for a 2" lift in the front
- Bilstein 6100's in the rear
- Westcott Designs 1" rear pucks
- Matte Black Method 703s (17"x8.5" w/ 35mm offset)
- BFG All-Terrain KO3s 285/75R17

I have no rubbing, no trimming needed, no need to remove crash brackets. Everything just worked out perfectly, but oh is it close haha

Shout out to @Furrypanda1121, @romik, @Twisted, @TheMachine, and @dirtwheeler For your insight and/or inspiring builds.

The Bilstein 6112's at circlip setting (#3) for a 2" lift in the front paired with the 1" (~0.8") Westcott Designs rear coil spacers and a factory rake of ~1.6", retains a slight rake after lifting which makes it look super mean.

IMO the amount of rubber on the 285/75R17 fills out the wheel well perfectly and pairs really nicely with the (2" front + 2.4" final rear height).

Bilstein 6112- installed

Bilstein 6100- installed

Sponsored

 

[romik]

Good job and congrats.

 

[RunnerRocks]

How is the on-road ride compared to stock ?

 

[BlueFinTunaGuy]

Good job and congrats.

Thank you! I love how it turned out!

 

[BlueFinTunaGuy]

How is the on-road ride compared to stock ?

The Bilsteins ride more firm than stock SR5 suspension but also have a nice high quality dampened feel to them.

 

[jcaluya27]

Looks good.

 

[ysv85]

So after a month of having my 4Runner and reading about everyone's awesome builds. I planned out a build

Build
- 2026 SR5 (7 seater) in Cutting Edge
- Removed Air Dam
- Bilstein 6112's at circlip setting (#3) for a 2" lift in the front
- Bilstein 6100's in the rear
- Westcott Designs 1" rear pucks
- Matte Black Method 703s (17"x8.5" w/ 35mm offset)
- BFG All-Terrain KO3s 285/75R17

I have no rubbing, no trimming needed, no need to remove crash brackets. Everything just worked out perfectly, but oh is it close haha

Shout out to @Furrypanda1121, @romik, @Twisted, @TheMachine, and @dirtwheeler For your insight and/or inspiring builds.

The Bilstein 6112's at circlip setting (#3) for a 2" lift in the front paired with the 1" (~0.8") Westcott Designs rear coil spacers and a factory rake of ~1.6", retains a slight rake after lifting which makes it look super mean.

IMO the amount of rubber on the 285/75R17 fills out the wheel well perfectly and pairs really nicely with the (2" front + 2.4" final rear height).

Bilstein 6112- installed

Bilstein 6100- installed

Can you add a picture of the 3rd row seats?

Sponsored