- First Name
- John
- Joined
- Aug 24, 2025
- Threads
- 7
- Messages
- 112
- Reaction score
- 124
- Location
- Bellevue, WA
- Vehicle(s)
- 2025 TRD Pro
There's only 6 bolts per side. Just need to lay down & tighten them in. Very easy! You can buy a set of sockets tool for ~$100 & still have $1,700 left for spending!Did you install them yourself or have it done? I was quoted like 1800 to install them just for the labor and was like no way. I'm sure I could do it myself though.
Dealer also quoted me $1800 to have these installed. I went with a shop that took 6h and charged me their hourly rate. It’s a lot more involved than 6 bolts. Unlike other applications where the brain links to the OBD2, this uses four independent magnet sensors that need to be mounted at the A/B pillars. Installer says it’s a pain in the ass install.There's only 6 bolts per side. Just need to lay down & tighten them in. Very easy! You can buy a set of sockets tool for ~$100 & still have $1,700 left for spending!
Don't pay a shop to do this, please. That's like paying them to refill your washer fluid.
Here you go! Cheap. Durable aluminum housings. Waterproof. Bright AF. Fits in OEM brackets. Got the 12 pack and used 6. Can daisy chain more or keep as spares in case they flicker/burn out.Could you drop a link to the rock lights?
Thanks, did you wire them to the rough country harness or just grab one of the oem light lights?Here you go! Cheap. Durable aluminum housings. Waterproof. Bright AF. Fits in OEM brackets. Got the 12 pack and used 6. Can daisy chain more or keep as spares in case they flicker/burn out.
White Rock Lights,Aluminum... https://www.amazon.com/dp/B0GF9WYSFS?ref=ppx_pop_mob_ap_share
I believe installer used the RC harness. The RC brain has some sort of timer relay. The lights stay on for a few seconds after the doors close and boards retract.Thanks, did you wire them to the rough country harness or just grab one of the oem light lights?