Sponsored

Emergency Jack Acceptable with Lifted Vehicle?

Desert_6Gen

TRD Off-Road Premium
Well-known member
First Name
Eric
Joined
Feb 6, 2025
Threads
5
Messages
101
Reaction score
54
Location
Arizona
Vehicle(s)
Bronco
Does anyone know if the spare jack has enough lift capability to remove the tires if there is a 2-3" lift? I'm worried that if I ever need to replace a flat that the spare jack might not have enough lift capability when I need it. If it doesn't I need to plan on what to get so it doesn't leave me stranded.
Sponsored

 

Joe Dirt

TRD Off-Road Premium
Well-known member
First Name
Mike
Joined
Sep 24, 2025
Threads
17
Messages
343
Reaction score
152
Location
SoCal
Vehicle(s)
25 ORP
I personally would never use a emergency Jack with a lifted vehicle it's just too dangerous. These are very Stout strong and very reasonable and they come with all the accessories for a lifted vehicle. Disregard the image of the tall boy on top we're talking about the lower Jack with the accessories . The bottle jack . Hope this helps here's an attached picture.

2025 2026 4runner 6th gen Emergency Jack Acceptable with Lifted Vehicle? Screenshot_20260509_074148_Chrom
 
Last edited:

mcd_ovrlnd

TRD Pro
Well-known member
Joined
Jan 19, 2026
Threads
20
Messages
179
Reaction score
97
Location
SE PA
Vehicle(s)
2025 4Runner TRD PRO
Bottle jacks come with weight displacement platforms that give incredible stability. I agree the floor jack model feels the best, but so bulky.
 

shine

Trailhunter
Well-known member
First Name
Chris
Joined
Mar 8, 2025
Threads
4
Messages
177
Reaction score
166
Location
Seattle
Vehicle(s)
2025 4Runner Trailhunter, 2008 4Runner SR5
Does anyone know if the spare jack has enough lift capability to remove the tires if there is a 2-3" lift? I'm worried that if I ever need to replace a flat that the spare jack might not have enough lift capability when I need it. If it doesn't I need to plan on what to get so it doesn't leave me stranded.
Answer is - it depends.

If you're replacing a flat rear tire the standard jack is still the right size. Remember that the jack point is on the axle behind the tire (check the owners manual for the exact jack point), and the distance from the axle to the ground doesn't change when the vehicle is lifted.

With an aftermarket jack, make sure it can get short enough if you plan to use the recommended rear jack point when the tire is flat.

Trying to jack up the rear from the frame is challenging. The Toyota jack might not be sufficient, and a lift or an extended travel shock will make it even more difficult. Also, the vehicle will be much higher up off the ground and less stable than if you jack up from the axle.

Changing the front tire is a different story, here the recommended jack point is on the frame. However, the front tires won't drop as far but still you would need to make sure you can get the front high enough to change the tire. I use a couple of 8x8x2 pieces of wood to build underneath the jack for the front. These pieces of wood are also useful if the ground is a bit soft.
Sponsored

 
 







Top