ARK Splash Guards installed

[Mike N]

For you all that wanted to see pics of the ARK Splashguards. Here are front and rear. Nice fit and protection from all dirt and debris. Worth doing for sure.

Sponsored

 

[ThatSickRIp]

For you all that wanted to see pics of the ARK splashguards. Here are front and rear. Nice fit and protection from all dirt and debris. Worth doing for sure.

That top left fastener is just looking like its wanting to find its way into your tire

 

[Mike N]

That top left fastener is just looking like its wanting to find its way into your tire

Good catch I'll tighten it down. Always a hood idea to check and retighten. Thanks!

 

[Joe Dirt]

For you all that wanted to see pics of the ARK splashguards. Here are front and rear. Nice fit and protection from all dirt and debris. Worth doing for sure.

Yes I like that very much. That looks like it protects it well. Also going for the splash guards in the near future

 

[ThatSickRIp]

Good catch I'll tighten it down. Always a hood idea to check and retighten. Thanks!

I see youre in Rochester and Im a Bills lifer, so figured Id do something good today

 

[Mike N]

I see youre in Rochester and Im a Bills lifer, so figured Id do something good today

Cool! Me too great game on Sunday was a nail biter but a win!
Those studs are factory and have plastic, finger tight nuts to hold the rear liners in. ARK supplies machine nuts to replace them and secure the guards. I missed tightening that one ugh. Thanks again and go Bills!!

 

[Bryce0291]

For you all that wanted to see pics of the ARK splashguards. Here are front and rear. Nice fit and protection from all dirt and debris. Worth doing for sure.

Do you have the link for them?

 

[Mike N]

Do you have the link for them?

https://arksplashguards.com/product...kZzAkdDE3ODk0OTA3NDckajYwJGwwJGgxNjI2ODk2OTU0

Do you have the link for them?

https://arksplashguards.com/product...kZzEkdDE3ODk0OTA4MDgkajYwJGwwJGgxNjI2ODk2OTU0

 

[Mike N]

https://arksplashguards.com/product...kZzAkdDE3ODk0OTA3NDckajYwJGwwJGgxNjI2ODk2OTU0

https://arksplashguards.com/product...kZzEkdDE3ODk0OTA4MDgkajYwJGwwJGgxNjI2ODk2OTU0

Hope these work I'm not real tech savy. Heck I can't even post without typos!

 

[xraytekca]

Can I install these without taking the wheel off?

 

[Mike N]

Can I install these without taking the wheel off?

I've heard others have. Easier with them off but doable. The big problem is lack of installation instructions. Best is to watch step by step YouTube video in shorts segments. Drilling a 5/16 hole in your rear liners is optional I did not do that. ARK supplies a bolt that holds it well without the additional fastener. If you do would be hard to access with the wheel on.

 

[Mike N]

I've heard others have. Easier with them off but doable. The big problem is lack of installation instructions. Best is to watch step by step YouTube video in shorts segments. Drilling a 5/16 hole in your rear liners is optional I did not do that. ARK supplies a bolt that holds it well without the additional fastener. If you do would be hard to access with the wheel on.

See left side of pic.

 

[Mike N]

See left side of pic.

Sorry right side not left.

 

[BluRunner]

Installed all 4 corners without removing the wheels. Directions kinda suck but I figured it out.

 

[SteveS]

Any issues with warranty after installing these? What about extra service costs if they get in the way?

Sponsored