Sponsored

Trailhunter DIY oil change difficulty w/r/t skid plate?

eloquentlight

Trailhunter
New member
Joined
Nov 8, 2026
Threads
1
Messages
1
Reaction score
0
Location
Kansas
Vehicle(s)
2026 4Runner Trailhunter
Hi everyone,

Waiting on my new Trailhunter to arrive here (November 22nd is the estimated arrival date), and wanted to ask if any fellow members have done their own oil changes on their Trailhunters? I know that this trim has the bigger skid plates underneath, and I'm curious to know how much of a pain that is to deal with for DIY oil changes. I priced out oil changes at the dealership (outside the free ones) and a local shop here, and it certainly makes more sense financially to do them myself, especially in light of the recommendations from Motor Oil Geek.

I'd also welcome any tips you all have: I'm getting the Toyota specific funnel and a few other things too. Likely a pair of those ramps since I am less flexible (and, well, bigger) than I was when I was younger and used to do my oil changes.

Anyhow, thanks!
Sponsored

 

shine

Trailhunter
Well-known member
First Name
Chris
Joined
Mar 8, 2025
Threads
4
Messages
273
Reaction score
264
Location
Seattle
Vehicle(s)
2025 4Runner Trailhunter, 2008 4Runner SR5
I've done three oil changes so far, it's easy peasy.

Removing and reinstalling the skid plate is made easier by it being designed so that you can slide the skid plate to remove it without having to remove the last two bolts. There was even a sheet of paper in the glovebox that described this when I purchased the 4Runner.

I don't even bother with ramps, there's enough clearance for me to get underneath and lower the skid plate onto my "ample belly." I'm not a skinny guy.

I slide a large piece of cardboard underneath the front so I can slide myself underneath to drop the skid, and catch any oil that misses the drain pan.

The drain plug sits at an angle, so recommend using a larger diameter pan for catching the oil. You'll also want something to catch oil from when you remove the filter.

27 ft-lbs on the skid plate bolts and 30 ft-lbs on the drain plug.
 

josiahg52

Trailhunter
Well-known member
First Name
Josiah
Joined
Jun 6, 2026
Threads
3
Messages
426
Reaction score
223
Location
Maine, United States
Vehicle(s)
2026 Trailhunter, 2018 Ram 2500, 2001 BMW M5, 2001 BMW X5 35d
The dealer and local shop I use charge nothing extra for an oil change, if that's an indicator.
 

Dead Horse

TRD Off-Road Premium
Well-known member
Joined
Sep 6, 2024
Threads
4
Messages
672
Reaction score
759
Location
Oklahoma
Vehicle(s)
4Runner
Hi everyone,

Waiting on my new Trailhunter to arrive here (November 22nd is the estimated arrival date), and wanted to ask if any fellow members have done their own oil changes on their Trailhunters? I know that this trim has the bigger skid plates underneath, and I'm curious to know how much of a pain that is to deal with for DIY oil changes. I priced out oil changes at the dealership (outside the free ones) and a local shop here, and it certainly makes more sense financially to do them myself, especially in light of the recommendations from Motor Oil Geek.

I'd also welcome any tips you all have: I'm getting the Toyota specific funnel and a few other things too. Likely a pair of those ramps since I am less flexible (and, well, bigger) than I was when I was younger and used to do my oil changes.

Anyhow, thanks!

There's a specific funnel?

:D

I cut the bottom half off of the Mobile 1 quart sized bottle, and the remaining top half (the part with the cap) screws directly into the oil fill port. Free funnel!
 

Joestac

Well-known member
Joined
Nov 21, 2025
Threads
28
Messages
757
Reaction score
601
Location
Austin, TX
Vehicle(s)
2025 4Runner Trailhunter
Be very careful tightening those bolts. The metal crossbeams are super soft metal and they are self-tapping bolts. They will strip. I already had to re-tap 3 of them because the Toyota dealer used an impact and they wouldn't even finger tight.
 

shackley

Trailhunter
Member
First Name
Steve
Joined
Feb 19, 2026
Threads
0
Messages
13
Reaction score
3
Location
Bernalillo County, New Mexico
Vehicle(s)
2026 Tacoma Trailhunter; 2023 RAV4 Prime
I've done three oil changes so far, it's easy peasy.

Removing and reinstalling the skid plate is made easier by it being designed so that you can slide the skid plate to remove it without having to remove the last two bolts. There was even a sheet of paper in the glovebox that described this when I purchased the 4Runner.

I don't even bother with ramps, there's enough clearance for me to get underneath and lower the skid plate onto my "ample belly." I'm not a skinny guy.

I slide a large piece of cardboard underneath the front so I can slide myself underneath to drop the skid, and catch any oil that misses the drain pan.

The drain plug sits at an angle, so recommend using a larger diameter pan for catching the oil. You'll also want something to catch oil from when you remove the filter.

27 ft-lbs on the skid plate bolts and 30 ft-lbs on the drain plug.
I agree with Chris, although I hold the drain pan up near the oil pan at first. The power of the draining oil is such that if the drain pan is on the ground a lot of oil splashes over the ground. Also, I use a small cup to catch the oil when I remove the filter.
 

ThatSickRIp

SR5
Well-known member
First Name
TSR
Joined
Jul 11, 2026
Threads
20
Messages
316
Reaction score
133
Location
VA
Vehicle(s)
2026 4Runner SR5
Be very careful tightening those bolts. The metal crossbeams are super soft metal and they are self-tapping bolts. They will strip. I already had to re-tap 3 of them because the Toyota dealer used an impact and they wouldn't even finger tight.
Good to know this. I got my LC skidplate for my SR5, and the bolts would not seat all the way, so I didint finish installing it. The binding felt like it would strip the threads
 

pmedicj

TRD Pro
Well-known member
Joined
Feb 18, 2026
Threads
1
Messages
146
Reaction score
85
Location
MA
Vehicle(s)
4Runner
Be very careful tightening those bolts. The metal crossbeams are super soft metal and they are self-tapping bolts. They will strip. I already had to re-tap 3 of them because the Toyota dealer used an impact and they wouldn't even finger tight.
This ^^^^^^
Don’t let the dealer near these bolts! I found when torquing mine that 27ft lbs is real close to stripping those 2 front bolts under the radiator support. I took it back out and the bolt was cross threading. I ran a tap through it and replaced it with a new oem bolt but couldn’t go over 15-20ft lbs on these, that’s plenty tight.
Sponsored

 
 







Top