Sponsored
Naw, I noticed but to me it's not worth fixing. I'm 79 years old with bad eyes so I tend to bugger up a lot of things these days.its all good, just a little ribbin. if it doesnt bother you, that is all that matters
My eye was drawn to the other pic...Orange is a bit to the right LOL
In fairness, I don't generally mess with decals because mine would be far worse than these
- First Name
- Matt
- Joined
- Mar 17, 2025
- Threads
- 6
- Messages
- 176
- Reaction score
- 109
- Location
- Hamilton, ON Canada
- Vehicle(s)
- 2025 4R
Operation Mod Out are also releasing the same puddle lights, in Toyota fonts: Platinum, Limited, SR5 etc. due out mid-December"operation mod out" door lights (front doors only)
plug and play install (unclip oem lights, plug these in)
$60 for a pair (with discount)
yeah im ok with the 4runner lights. i rather have those than platinum since pretty much every oem has a platinum trim anyway.
its like the raptor lights, now everyone has them even though it only looks right on vehicle that are wide enough to be federally mandated to have them. i mean technically any vehicle over 80in wide is suppose to have them and the tundra w/o counting the mirrors is 80.2 wide
why you would put raptor lights on a tacoma or 4runner is beyond me, but each their own i guess.
I reinstalled the bolts to protect the threads for one, and to prevent losing them for anotherAir dam removal
The quintessential dam removal. I was apprehensive to do it… but it was as easy as folks have said. A couple YouTube videos helped as well.
Before and after below.
**tip: I would release the clips vs just ripping it off once the bolts are off.
Also… did anyone throw new bolts back in the holes? It feels wrong to leave them open.
not so much a mod than a part SR5 doesn't have.... I got OEM D-pillar lights and they
really light up the cargo bay so much better than the little stock LED chips on the side
...SR5 is pre-wired for these, open connectors were just layin in there waitin for a job to do
really light up the cargo bay so much better than the little stock LED chips on the side
...SR5 is pre-wired for these, open connectors were just layin in there waitin for a job to do
Can you post pics? I’m interested in this mod. Whole interior of the truck feels dark.
OP
OP
- First Name
- Buzz
- Joined
- Nov 5, 2025
- Threads
- 3
- Messages
- 80
- Reaction score
- 68
- Location
- East Coast, USA
- Vehicle(s)
- '25 4runner SR5, '19 Golf R
- Thread starter
- #28
Went ahead and added the OEM hood insulator. It installs in 30 seconds… unless you are like me and you forget to insert the large material tabs into the back slots. I wasted a bunch of time having to pop them out and then reinstall it correctly. The OE tabs do not like to be removed.
OP
OP
- First Name
- Buzz
- Joined
- Nov 5, 2025
- Threads
- 3
- Messages
- 80
- Reaction score
- 68
- Location
- East Coast, USA
- Vehicle(s)
- '25 4runner SR5, '19 Golf R