What did you do to your 6th Gen 4Runner today?? 👨🏻‍🔧 🧰 🛠

[a_double]

New tires on stock 20" . Cooper Discoverer Road & Trail AT 275/60/20.

Did you have to remove anything to clear these tires? Any rubbing? Thanks in advance.

Sponsored

 

[gmarcucio]

Husky Rain Guards

Very nice! What roof rack is that?

 

[ItsmeAlex]

Did you have to remove anything to clear these tires? Any rubbing? Thanks in advance.

Doesn't sound like it rubs at all and may even have enough clearance for 285 tires.

See - https://www.4runner6g.com/forum/thr...at-tires-on-20-factory-trd-sport-wheels.8595/

 

[Rellims]

Blacked out the climate and volume knobs via AJT Designs.

 

[BonRunner]

Did you have to remove anything to clear these tires? Any rubbing? Thanks in advance.

Zero rub! Zero modifications. Drive great with no issue after 300 miles!

 

[BonRunner]

Installed a dash cam system & rear camera. Love the OEM mount & inconspicuous fitment. You can't tell it's there from driver/passenger view; even from outside! I printed a 3D mount plate for the rear camera and mounted to one of the headliner's clip, passenger side.

I didn't center the rear because that's a blind spot for wiper blade if rear glass is dirty. Still get full view at my spot.

Very happy with this setup! I use an old iPhone to view live footage via wifi & SanDisk 512gb High Endurance memory card.

 

[Voltron]

Wired up the drl and turn signals

 

[Administrator]

Let's see what you've done to your 4runner today / lately ?‍

 

[OffRoadUSA.com]

Wired up the drl and turn signals

Looks good!

 

[BonRunner]

Installed foot light. Took about 30 mins. Not bad & looks clean for cheap mod. Lights stay on when car is on & vice versa.

 

[VB4Runner]

Added a passenger-side grab handle (thanks to this forum’s members for the tip) and gave the 4R a good wash and wax.

 

[Rellims]

Installed Agency 6 grab handles to the roof rack.

 

[Gerardo]

Added StickerFab "TRD" Door Line Overlays and "TOYOTA" Front Door Sill Letter Overlays (both red).

The "TRD" overlays look pretty sweet!

Not sure how long the door sill overlays will last, but looks cool. LOL

Here is the "TRD" letter overlay in progress:

And here is the result:

The door sill overlays:

 

[BluRunner]

Blacked out the climate and volume knobs via AJT Designs.

How did ya get em off?? Sent mine back. I used plastic body tools to pry off the plastic ones but they weren't budging. The console "mode" button made me give up. If i broke that prying on it...

 

[Rellims]

How did ya get em off?? Sent mine back. I used plastic body tools to pry off the plastic ones but they weren't budging. The console "mode" button made me give up. If i broke that prying on it...

They just slipped right over.

Sponsored