Cleaned up TRD Pro - removed running boards & roof rails. Swapped scoop hood

FlyCook · Oct 13, 2025

I decided to remove some things asap.

Steps gone. Hood swapped. Roof rack is back on for now but it’s coming off again.

For what it’s worth, the brackets for the roof gutter clips are the exact same ones used for the 2025 LANDCRUSHER so if you’re looking to clean up the roof then you gotta get those parts. Toyota didn’t have a listing for the pro on their schematics at the time I made the call.

2025 4runner 6th gen Cleaned up TRD Pro - removed running boards & roof rails. Swapped scoop hood Cleaned up TRD pro - removed running boards & roof rack. Swapped scoop hood

2025 4runner 6th gen Cleaned up TRD Pro - removed running boards & roof rails. Swapped scoop hood IMG_4477

MUFASA · Oct 14, 2025

Curious why swapped the hood? You selling it?

Reef_OC · Oct 14, 2025

Are you selling a hood with the scoop? Im interested!

adrian · Oct 14, 2025

nice! trd sport tag on hood, original? (or where did you get it from?)

Twisted · Oct 14, 2025

Much like the others, what you doin with that scoop hood? I'm in Oregon as well.

Joe Dirt · Oct 14, 2025

FlyCook said:
I decided to remove some things asap.

Steps gone. Hood swapped. Roof rack is back on for now but it’s coming off again.

For what it’s worth, the brackets for the roof gutter clips are the exact same ones used for the 2025 LANDCRUSHER so if you’re looking to clean up the roof then you gotta get those parts. Toyota didn’t have a listing for the pro on their schematics at the time I made the call.

Looks good nice and clean. I've been thinking of taking those roof rails off as well. But I was stumped because after removing them aren't you left with a gap where the rail sits? I'm guessing that's what you're referring to as the part for the Land Cruiser? Thanks in advance

Van Solo · Oct 14, 2025

mikeduff said:
Looks good nice and clean. I've been thinking of taking those roof rails off as well. But I was stumped because after removing them aren't you left with a gap where the rail sits? I'm guessing that's what you're referring to as the part for the Land Cruiser? Thanks in advance

Roof rack Delete Kit below as per other member!

2025 4runner 6th gen Cleaned up TRD Pro - removed running boards & roof rails. Swapped scoop hood 21064-7420bbbe3d6c52e83c8b89ecbb4b9a33

FlyCook · Oct 15, 2025

MUFASA said:
Curious why swapped the hood? You selling it?

Didn’t like it. Another owner wanted it so we agreed to swap hoods months ago

mikeduff said:
Looks good nice and clean. I've been thinking of taking those roof rails off as well. But I was stumped because after removing them aren't you left with a gap where the rail sits? I'm guessing that's what you're referring to as the part for the Land Cruiser? Thanks in advance

Yes. Exactly. Yota Expeditions on YT has a vid on the parts needed.

MUFASA said:
Curious why swapped the hood? You selling it?

no, swapped hoods with another owner of an sr5

Twisted said:
Much like the others, what you doin with that scoop hood? I'm in Oregon as well.

swapped it with another owner of an sr5

FlyCook · Oct 15, 2025

Twisted said:
Much like the others, what you doin with that scoop hood? I'm in Oregon as well.

clean swap with an owner of an sr5

drNick · Oct 15, 2025

Looks very clean. I like it very much. Good job!

FlyCook · Oct 15, 2025

Thanks! It was one of my goals from the beginning. Wanted a trd pro, didn’t want all the flashy cosmetic crap. Just got my recovery points (black) in the mail yesterday. Next is the ARB air single motor brushless compressor since the twin is too large for the engine bay (driver side. Trust me, I sized it up.) Need a flag for the Oregon dunes and then off to have lots of fun.

FlyCook · Oct 15, 2025

adrian said:
nice! trd sport tag on hood, original? (or where did you get it from?)

Not sure of your question. I may have answered it in a different reply

Dr_Al · Oct 15, 2025

I had a 1990 Celica All-trac Turbo that had a hood scoop. Back then Toyota put the intercooler on top of the engine so the scoop was actually functional. I really hoped Toyota would have done the same for the 4Runner. It also made the engine look much nicer when you opened the hood. Of course Toyota had a sense of humor back then too. They put the oil filter under the intercooler so you had to remove it each time to change the filter. The real problem was that the filter was upside down so as soon as you loosened it up all the oil trapped in it would dump on top of the engine.

shaqinfatak · Oct 16, 2025

is there anything hood insulation for noise cancelletion for trd pro 25?

FlyCook · Oct 16, 2025

shaqinfatak said:
is there anything hood insulation for noise cancelletion for trd pro 25?

There is on the trd pro. Great question! I’d recommend buying 10 spare plastic clippy thingys. I broke almost all of them. I kept the insulation board.

Cleaned up TRD Pro - removed running boards & roof rails. Swapped scoop hood

FlyCook

Member

MUFASA

New member

Reef_OC

Member

adrian

Member

Twisted

Well-known member

Joe Dirt

Well-known member

Van Solo

Well-known member

FlyCook

Member

FlyCook

Member

drNick

Well-known member

FlyCook

Member

FlyCook

Member

Dr_Al

Well-known member

shaqinfatak

Member

FlyCook

Member

Similar threads