Cleaned up TRD Pro - removed running boards & roof rails. Swapped scoop hood

[FlyCook]

I decided to remove some things asap.

Steps gone. Hood swapped. Roof rack is back on for now but it’s coming off again.

For what it’s worth, the brackets for the roof gutter clips are the exact same ones used for the 2025 LANDCRUSHER so if you’re looking to clean up the roof then you gotta get those parts. Toyota didn’t have a listing for the pro on their schematics at the time I made the call.

Sponsored

 

[MUFASA]

Curious why swapped the hood? You selling it?

 

[Reef_OC]

Are you selling a hood with the scoop? Im interested!

 

[adrian]

nice! trd sport tag on hood, original? (or where did you get it from?)

 

[Twisted]

Much like the others, what you doin with that scoop hood? I'm in Oregon as well.

 

[Joe Dirt]

I decided to remove some things asap.

Steps gone. Hood swapped. Roof rack is back on for now but it’s coming off again.

For what it’s worth, the brackets for the roof gutter clips are the exact same ones used for the 2025 LANDCRUSHER so if you’re looking to clean up the roof then you gotta get those parts. Toyota didn’t have a listing for the pro on their schematics at the time I made the call.

Looks good nice and clean. I've been thinking of taking those roof rails off as well. But I was stumped because after removing them aren't you left with a gap where the rail sits? I'm guessing that's what you're referring to as the part for the Land Cruiser? Thanks in advance

 

[Van Solo]

Looks good nice and clean. I've been thinking of taking those roof rails off as well. But I was stumped because after removing them aren't you left with a gap where the rail sits? I'm guessing that's what you're referring to as the part for the Land Cruiser? Thanks in advance

Roof rack Delete Kit below as per other member!

 

[FlyCook]

Curious why swapped the hood? You selling it?

Didn’t like it. Another owner wanted it so we agreed to swap hoods months ago

Looks good nice and clean. I've been thinking of taking those roof rails off as well. But I was stumped because after removing them aren't you left with a gap where the rail sits? I'm guessing that's what you're referring to as the part for the Land Cruiser? Thanks in advance

Yes. Exactly. Yota Expeditions on YT has a vid on the parts needed.

Curious why swapped the hood? You selling it?

no, swapped hoods with another owner of an sr5

Much like the others, what you doin with that scoop hood? I'm in Oregon as well.

swapped it with another owner of an sr5

 

[FlyCook]

Much like the others, what you doin with that scoop hood? I'm in Oregon as well.

clean swap with an owner of an sr5

 

[drNick]

Looks very clean. I like it very much. Good job!

 

[FlyCook]

Thanks! It was one of my goals from the beginning. Wanted a trd pro, didn’t want all the flashy cosmetic crap. Just got my recovery points (black) in the mail yesterday. Next is the ARB air single motor brushless compressor since the twin is too large for the engine bay (driver side. Trust me, I sized it up.) Need a flag for the Oregon dunes and then off to have lots of fun.

 

[FlyCook]

nice! trd sport tag on hood, original? (or where did you get it from?)

Not sure of your question. I may have answered it in a different reply

 

[Dr_Al]

I had a 1990 Celica All-trac Turbo that had a hood scoop. Back then Toyota put the intercooler on top of the engine so the scoop was actually functional. I really hoped Toyota would have done the same for the 4Runner. It also made the engine look much nicer when you opened the hood. Of course Toyota had a sense of humor back then too. They put the oil filter under the intercooler so you had to remove it each time to change the filter. The real problem was that the filter was upside down so as soon as you loosened it up all the oil trapped in it would dump on top of the engine.

 

[shaqinfatak]

is there anything hood insulation for noise cancelletion for trd pro 25?

 

[FlyCook]

is there anything hood insulation for noise cancelletion for trd pro 25?

There is on the trd pro. Great question! I’d recommend buying 10 spare plastic clippy thingys. I broke almost all of them. I kept the insulation board.

Sponsored