Yeah builds can become quite the rabbit hole…lol. I’m already “upgrading” the TH. Amsoil looks like a good bet. Did you do it yourself? Love your Taco- what suspension did you use?
Sponsored
Sponsored
OME MT64 lift kit installed (front set at 2.25") + Dobinsons C59-885V rear springs + Raceline Rogue 18X8.5 wheels + Goodyear 275/70/18 Ultra Terrain
- First Name
- Daron
- Joined
- Sep 17, 2024
- Threads
- 1
- Messages
- 14
- Reaction score
- 0
- Location
- Santa Clarita, CA
- Vehicle(s)
- 2024 & 2025 Tacoma's & 2025 4Runner TRD Off-Road Premium
Can you tell me if you clipped yours where the clip is in the picture, or one down from that where the arrow is
OP
OP
- Thread starter
- #18
Yeah I did the Amsoil myself I do it when ever I think it needs it. Park your truck on a tarp since it does make a mess of your drive way if you don't lol... The Front is A total Chaos kit while the rear is JD fab SUA that's been modified a bit...
Can you tell me if you clipped yours where the clip is in the picture, or one down from that where the arrow is
That is set at 2.5" one down will get you at 2.25". 2.5" should sit almost level with the Dobinson's I used so either one depending on your taste... Hope that helps
Ok - that’s a good call about the tarp. What areas do you avoid? I’m assuming the exhaust. You said it takes a while to set up. Like 24 hours?
Did you do the full front OME? UCAs? If you could post a link to the front setup that would be awesome.
I’m considering the same to eliminate the front rake (1.5”) but not cause squat when towing my light trailer
can you adjust the lift height yourself without removing anything?
I’m considering the same to eliminate the front rake (1.5”) but not cause squat when towing my light trailer
can you adjust the lift height yourself without removing anything?
Sponsored
Similar threads
