Dissent Off-Road 4Runner 6th gen build

[4running]

Dissent Off-Road's own 6th gen 4Runner build - parts list:

Dissent low profile front winch bumper

• 3/16" steel construction
• Recessed recovery points, chamfered for soft shackle use
• Supports 2" fog lights (Baja Designs S2, Rigid SR-M, etc.)
• Hi-Lift jack ready with bumper-based lift points
• Winch ready, fits most 8.5k–12.5k winches
• Winch clutch access and line feed viewing slots
• Core Support Bracket to prevent bumper flap at speed
• Bracket includes slots for up to four pod lights behind the grille
• Compatible with factory TRD skid plates
• Includes Grade 8/Grade 10.9 hardware kit
• High quality black powder coat finish
• 100% designed, engineered, and manufactured in the USA
• Bumper adds just 17 lbs after factory parts are removed

Dissent full width rear bumper w/ swing-out tire carrier

• High clearance design for departure angle gains
• Integrated 3/4" recovery points
• Swing-out compatible for spare, fuel, or gear management
• Retains factory sensors and camera integration
• Modular options for expedition-ready configurations
• Approx. 125 lbs total

Dissent rock sliders

• 4 mounting brackets per side
• Installs without any welding, cutting
• Super grip traction surface for surefooted entry & exit
• Recessed fasteners to protect them from damage or getting caught on
• 100% designed, engineered, and manufactured in the USA
• Comes with high-quality Grade 8/Grade 10.9 hardware kit
• Black powder coat included

Nitto Recon Grappler A/T in 285/75R18 (35x11.5) tires
ICON Alloys Recon Pro, 18x9, +40mm offset, charcoal color

Westcott roof rack with window MOLLE panels

Icon Vehicle Dynamics suspension

• ICON CDVS Coilovers (Front): Dual speed compression adjustable shocks
• ICON Billet Upper Control Arms: CNC-machined with high-angle ball joints
• ICON Rear Shocks: CDVS dampers for consistent trail performance
• ICON 2" Sequoia Rear Springs: Two-inch lift coils with improved rate for load support

AlphaRex Alpha Black projector headlights
XL80 linkable roof rack bar with 7 lights across the rack
Baja Designs S2 Sports for side/area illumination
Baja Designs rock lights on undercarriage
4 Baja Squadron Pro lights on Dissent grille support brace
Baja Designs SAE clear fog lights kit
Dual Baja Designs S2 SAE amber fog lights on bumper
Kingpin Equipped 40" rear hatch light
XL80 light mount brackets from Westcott, custom S2 mounts from Dissent

HD BantamX Power Management System

Agency6 red grab handles, Agency6 shovel combo (red mount + black mini shovel)

Air Down Gear Up - Sleeping Bed Platform System & Drawers

Sponsored

 

[Xuberant]

Wow!!! Thank you for posting this!


Quick question for you. What made you go with the Westcott roof rack over say a Pinsu or Cali LED?

 

[anhnguyen310]

That air up gear down drawer system is legit af but so costly. Do they want to sponsor a trail hunter lol. Great build!

 

[Rock Doc]

Dissent Off-Road's own 6th gen 4Runner build - parts list:

Dissent low profile front winch bumper

• 3/16" steel construction
• Recessed recovery points, chamfered for soft shackle use
• Supports 2" fog lights (Baja Designs S2, Rigid SR-M, etc.)
• Hi-Lift jack ready with bumper-based lift points
• Winch ready, fits most 8.5k–12.5k winches
• Winch clutch access and line feed viewing slots
• Core Support Bracket to prevent bumper flap at speed
• Bracket includes slots for up to four pod lights behind the grille
• Compatible with factory TRD skid plates
• Includes Grade 8/Grade 10.9 hardware kit
• High quality black powder coat finish
• 100% designed, engineered, and manufactured in the USA
• Bumper adds just 17 lbs after factory parts are removed

Dissent full width rear bumper w/ swing-out tire carrier

• High clearance design for departure angle gains
• Integrated 3/4" recovery points
• Swing-out compatible for spare, fuel, or gear management
• Retains factory sensors and camera integration
• Modular options for expedition-ready configurations
• Approx. 125 lbs total

Dissent rock sliders

• 4 mounting brackets per side
• Installs without any welding, cutting
• Super grip traction surface for surefooted entry & exit
• Recessed fasteners to protect them from damage or getting caught on
• 100% designed, engineered, and manufactured in the USA
• Comes with high-quality Grade 8/Grade 10.9 hardware kit
• Black powder coat included

Nitto Recon Grappler A/T in 285/75R18 (35x11.5) tires
ICON Alloys Recon Pro, 18x9, +40mm offset, charcoal color

Westcott roof rack with window MOLLE panels

Icon Vehicle Dynamics suspension

• ICON CDVS Coilovers (Front): Dual speed compression adjustable shocks
• ICON Billet Upper Control Arms: CNC-machined with high-angle ball joints
• ICON Rear Shocks: CDVS dampers for consistent trail performance
• ICON 2" Sequoia Rear Springs: Two-inch lift coils with improved rate for load support

AlphaRex Alpha Black projector headlights
XL80 linkable roof rack bar with 7 lights across the rack
Baja Designs S2 Sports for side/area illumination
Baja Designs rock lights on undercarriage
4 Baja Squadron Pro lights on Dissent grille support brace
Baja Designs SAE clear fog lights kit
Dual Baja Designs S2 SAE amber fog lights on bumper
Kingpin Equipped 40" rear hatch light
XL80 light mount brackets from Westcott, custom S2 mounts from Dissent

HD BantamX Power Management System

Agency6 red grab handles, Agency6 shovel combo (red mount + black mini shovel)

Air Down Gear Up - Sleeping Bed Platform System & Drawers

Love the setup! Thanks for sharing I am looking for ideas for the sleeping with storage will check out the system you have installed. Waiting on my Westcott sliders and roof rack just starting my build on my TRD Pro!

 

[Xuberant]

Love the setup! Thanks for sharing I am looking for ideas for the sleeping with storage will check out the system you have installed. Waiting on my Westcott sliders and roof rack just starting my build on my TRD Pro!

May I ask your opinion on what made you go with Westcott over Prinsu or Cali LED?

 

[Rock Doc]

May I ask your opinion on what made you go with Westcott of Prinsu or Cali LED?

To me Westcott seems to have the highest quality and the little details matter to me like the matching ends of the sliders to follow the lines of the 6th Gen and the fit of the roof rack a closer/tighter fit to the roof lines. I looked at Prinsu and for me I didn't like taller roof rack I am sure the others are great products I just wanted to use all Westcott for my upgrades will be ordering the top hats and pre-collar lift kit wanted everything from the same company not mixed and matched.

 

[Keroppi]

Love seeing full out builds pushing the envelope like this. There's not much left to mod on this 6th gen that's for sure

 

[shine]

Love the build! How long is the sleeping platform?

 

[Scrappopatamus]

I like. Looks to be a very sorted rig. Congrats !! Noticed your rig all over the Dissent Off Road's site. Curious if you have anything to do with Dissent other than increasing their earning?

 

[shine]

Walkthrough video:

Sponsored