Crash Plate Removed From Driver Side - Photo Request

[Rock Doc]

Can someone please send me a picture after the driver side crash plates have been removed. There is one piece that is holding some kind of wiring on the driver side and mine looks like it is bent or out of place the passenger side is clean after removal of plates. I am getting tire rub on the driver side when turning just want to compare.

Thank you!!

Sponsored

 

[Archer]

 

[Rock Doc]

Thank you this confirms that lower piece has moved on me and is bent are you getting any rubbing with the piece with the wiring and two bolts, do you know what the wiring is for?

 

[MikeD]

Thank you this confirms that lower piece has moved on me and is bent are you getting any rubbing with the piece with the wiring and two bolts, do you know what the wiring is for?

It appears that my TRD ORP does not have that wiring (see photos), so I hypothesize that it is related to the SDM (which I regret not having after the comparison of our relative success on that obstacle this weekend:>)
Crash bracket delete middle of install:

Crash bracket delete install complete:

 

[Archer]

No rubbing but if yours is hitting it looks like it only has 2 bolts to remove to be able to modify it to make clearance.


.

 

[Rock Doc]

It appears that my TRD ORP does not have that wiring (see photos), so I hypothesize that it is related to the SDM (which I regret not having after the comparison of our relative success on that obstacle this weekend:>)
Crash bracket delete middle of install:

Crash bracket delete install complete:

Thanks Mike will loosen and put back in correct position looks like a hammer swing will bend it back.

 

[Rock Doc]

No rubbing but if yours is hitting it looks like it only has 2 bolts to remove to be able to modify it to make clearance.


.

I think I can adjust it not sure if I want to take it off since it has that wiring attached to it will evaluate tomorrow have to do an oil change at dealer so will ask them to take a look thanks for the feedback.

 

[QuezJacq]

Do you have the sway bar disconnect? If so, that’s what it is. I relocated mine. You can see that here.

Sponsored