Lots of Raptor light installs covered on the forum. Do a google search for "raptor lights install site:4runner6g.com"I searched in the group as best I could but couldn’t find my answer.
What I'm trying to find out is whether it's compatible with a hybrid vehicle.Lots of Raptor light installs covered on the forum. Do a google search for "raptor lights install site:4runner6g.com"
But here's some I found using search...
https://www.4runner6g.com/forum/thr...-6th-gen-4runner-grille-diy-video-added.3916/
https://www.4runner6g.com/forum/thr...-raptor-grille-light-install-with-video.5557/
https://www.4runner6g.com/forum/thr...hts-on-4runner-trd-sport-premium-grille.5441/
https://www.4runner6g.com/forum/thr...trailhunter-and-raptor-lights-on-my-sr5.5463/
What kind of errors?What I'm trying to find out is whether it's compatible with a hybrid vehicle.
The examples you've listed all seem to be installations on non-hybrid vehicles.
There have been several reports of errors occurring when installing it on a hybrid
No problem so far with mine on my hybrid. Not sure what will happen when the shutters can’t close fully as the leads from each of the lights passes through the opening for the shutter vanes. May be no problem at all?What I'm trying to find out is whether it's compatible with a hybrid vehicle.
The exam
There have been several reports of errors occurring when installing it on a hybrid
I installed these on my hybrid ORP with no problems. I tapped into the "tail" mini fuse in the cabin so that they come on with my running lights and headlights are on.What kind of errors?
I have them on my hybrid.
MartyMcFly: I'm installing the sameI now see the other post talking about fit and such.
I bought mine on Amazon: https://www.amazon.com/dp/B0FS6LPKXW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Very easy install. I ended up wiring mine to my Aux 4 switch. Hardest part of the install was getting the pigtail attached/removing the cap![]()
Marty McFly: I'm installing the same lights. Did you disconnect the battery first? Seems like disconnecting the battery is not needed since you connected to the Aux 4 switch, that was in the 'off' position.I now see the other post talking about fit and such.
I bought mine on Amazon: https://www.amazon.com/dp/B0FS6LPKXW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Very easy install. I ended up wiring mine to my Aux 4 switch. Hardest part of the install was getting the pigtail attached/removing the cap![]()
I did not, I just unplugged the pig tail cap, wired the pig tail up, plugged the pigtail in. Didn’t see a need to disconnect the battery. Was easy, once you get the cap off. I wish I had better advice for that!MartyMcFly: I'm installing the same
Marty McFly: I'm installing the same lights. Did you disconnect the battery first? Seems like disconnecting the battery is not needed since you connected to the Aux 4 switch, that was in the 'off' position.