Interior MOLLE panels

[alpa_chino]

Whats everyone using for interior Molle panels? Specifically for the rear windows. Seen a few companies have products out like Rago, Victory 4x4, and Cali Raised. Anyone have recommendations or pics of theirs? Havent seen too many posts or pics yet

Sponsored

 

[RockHopper]

I just ordered a set of Cali Raised LED interior MOLLE panels with the top rack. I had this set-up in my 5th Gen and loved it. I do a lot of kayak camping so most of my gear is small and light and fits on the upper rack. I didn't really use the side panels for much, other than a shovel mount. There's legit concerns of all of this stuff becoming shrapnel in the event of an accident, so I never really keep anything heavy mounted to the panels and remove everything when I'm not out camping or on the trails.

 

[sliver]

Same

 

[RdMick]

I just ordered a set of Cali Raised LED interior MOLLE panels with the top rack. I had this set-up in my 5th Gen and loved it. I do a lot of kayak camping so most of my gear is small and light and fits on the upper rack. I didn't really use the side panels for much, other than a shovel mount. There's legit concerns of all of this stuff becoming shrapnel in the event of an accident, so I never really keep anything heavy mounted to the panels and remove everything when I'm not out camping or on the trails.

Kayak camping for the win!

 

[Island Style]

Any chance you could post some pics?
Thank you in advance.

 

[alpa_chino]

I just ordered a set of Cali Raised LED interior MOLLE panels with the top rack. I had this set-up in my 5th Gen and loved it. I do a lot of kayak camping so most of my gear is small and light and fits on the upper rack. I didn't really use the side panels for much, other than a shovel mount. There's legit concerns of all of this stuff becoming shrapnel in the event of an accident, so I never really keep anything heavy mounted to the panels and remove everything when I'm not out camping or on the trails.

I was leaning toward the Rago myself. I think I am only going to put smaller items like med bag and another small molle bag and maybe one or two other things. Really just need to have more room in the storage cubbies since I have less space with the hybrid

 

[EZink]

I feel like the vicktory 4x4’s are the least invasive to the interior

 

[Icculus]

So I'm not sure how much this will help since Iechnically I never got around to installing. I purchased the Rago Fab internal rear window panels and then later purchased the shelf for my 5th gen. Again I never got around to installing and now they are for sale as I'm moving to a 6th gen. I know it doesn't help much from a complete review standpoint since never installed but based just on inspection I was happy with the quality. One thing I noticed was on the 5th gen the top bolt bracket was one thing for just the panels and then upgraded to a thicker unit if you decided to go with the shelf. In looking at the product on the web page I don't see this difference for the 6th gen (guessing they just went ahead and upgraded the top bracket if you are using the shelf or not???),
I am planning on ordering a set from Rago for the 6th gen (and not being lazy) if that helps and will try and report back soon. Cheers

ETA:
And i if it matters to address the flying debris concern raised above; which is a totally legitimate concern.. Mounted on mine via knuckles,etc will be the following: Rago specific extinguisher mount, tear away med kit, small emergency lights, recovery/snach rope and DMOS shovel. Yes I'm sure with enough force these could become projectiles but I guess in my mind if I hit something that hard I have other concerns. Now if you are talking about somehow mounting Hi-Lift jack anywhere above seat level or even worse just having it chilling in the back that is definitelly a torpedo I wouldn't pointed at my head

ETA2:

Just look closer and saw where the Rago panels require drilling and unless I'm looking wrong is a 2 piece design on each side. Plus where the 5th gen design used 3 hard bolt connection points the 6th gen is relying on screw connections into plastic Not saying this is a deal breaker but the ones on the 5th gen used 3 stock bolt locations, didn't require any permanent modification and were one piece per side. Not saying this is a deal breaker but definitely something I didn't notice on my first cursory look at the product

 

[DocASim]

I just received my interior MOLLE panel, driver side window. I bought the CaliRaised because of the installation. No cutting required. I’ll post some pics once installed. I have the Westcott roof rack and exterior molle panel.

 

[Icculus]

I just received my interior MOLLE panel, driver side window. I bought the CaliRaised because of the installation. No cutting required. I’ll post some pics once installed. I have the Westcott roof rack and exterior molle panel.

I'd be stoked to see these. I definitely could be missing something but don't see the 6th gen interior rear window molle panels on their site

 

[DocASim]

https://caliraisedled.com/products/interior-rear-side-window-molle-panel-for-2025-4runner

 

[Icculus]

https://caliraisedled.com/products/interior-rear-side-window-molle-panel-for-2025-4runner

Thank you very much. It appears that Cali Raised has two websites now. https://caliraisedoffroad.com/ and also https://caliraisedled.com/

They have different presentations and a different layout of products. I was looking at the Cali Raised offroad site. Not sure why a brand would present two very different layouts of their product offerings but thats another topic entirely relating to branding and sales. Much appreciate the link

 

[alpa_chino]

I just received my interior MOLLE panel, driver side window. I bought the CaliRaised because of the installation. No cutting required. I’ll post some pics once installed. I have the Westcott roof rack and exterior molle panel.

Post pics when you get them on! Do you have the extra cargo lights in the back? It looks like it would cover them and also looks like it takes up a lot more space than others like blocking the cargo cover as well.

 

[Captain_Hook]

I have a 60% related question, has anyone found exterior Molle panels that are made to attach to the stock ARB roof rack that comes with the trail hunter? I have found “universal” ones but all the others are made to attach to that company’s roof rack, Gobo, Cali, prinsu, etc all attach to theirs. ARB doesn’t offer Molle panels.
Thanks for the help!

 

[ropdykex11]

following this thread, excited about the cali raised interior panels.

@DocASim let's see those pictures!

Sponsored