ARB OME MT64 Suspension Lift Kit (2.5 inches front / 2 inches rear) on 2025 4runner SR5

clarkdot7 · May 13, 2026

ARB OME MT64 Suspension Lift Kit (2.5 inches front / 2 inches rear) on 2025 4runner SR5

Finally got around to installing the MT64 lift on the car. A whole day install ordeal but very worth it in the end.

2025 2026 4runner 6th gen ARB OME MT64 Suspension Lift Kit (2.5 inches front / 2 inches rear) on 2025 4runner SR5 34766-1ed6694e5149365dd8cf830a4e4ec

2025 2026 4runner 6th gen ARB OME MT64 Suspension Lift Kit (2.5 inches front / 2 inches rear) on 2025 4runner SR5 34764-1aba8ac2746e4316b5155323ed7b1710

2025 2026 4runner 6th gen ARB OME MT64 Suspension Lift Kit (2.5 inches front / 2 inches rear) on 2025 4runner SR5 34765-a4cadeea39259c670b053343217e54ad

MikeD · May 13, 2026

Congrats!
Did you do the # 2135K kit (with the UCA) or the one without? Did you buy direct from ARB?
Sounds like you did it yourself. (right?) I am contemplating that and wondering how tough the UCA is to remove and replace.
Any photos or videos of the install itself?
What were the toughest/trickiest parts?
Advice on any lessons learned after working through those tricky spots?
Key references for guiding the install? (I've watched ARBs video and a few others but hearing from another DYIer is always helpful - and you may have found something I've missed as a guide.)

Looking forward to hearing how it performs off road.
Congrats again.

suremang · May 13, 2026

MikeD said:
Congrats!
Did you do the # 2135K kit (with the UCA) or the one without? Did you buy direct from ARB?
Sounds like you did it yourself. (right?) I am contemplating that and wondering how tough the UCA is to remove and replace.
Any photos or videos of the install itself?
What were the toughest/trickiest parts?
Advice on any lessons learned after working through those tricky spots?
Key references for guiding the install? (I've watched ARBs video and a few others but hearing from another DYIer is always helpful - and you may have found something I've missed as a guide.)

Looking forward to hearing how it performs off road.
Congrats again.

I installed the OME MT64 myself with the help of friends and by far the most difficult part was loosening the stock UCA bolt. It is torqued on there pretty good so definitely use a breaker bar and/or cheater bar to break it loose. Just remember to put load on the suspension before you torque down the UCA bolt. Full suspension install can be done by yourself but goes much smoother with another person or two. Otherwise the install is pretty straight forward.

Van Solo · Sunday at 9:02 PM

So you adjusted the factory 3" setting to 2.5" on the front ?

clarkdot7 · Sunday at 9:09 PM

Van Solo said:
So you adjusted the factory 3" setting to 2.5" on the front ?

Yeah, imo 3 inches in the front on a stock weight 6gen makes the front sit too high, i still wanted a little bit of rake

Van Solo · Sunday at 9:11 PM

Left mine at 3" so we can add the winch soon, without the extra work.
yours does look good too!

2025 2026 4runner 6th gen ARB OME MT64 Suspension Lift Kit (2.5 inches front / 2 inches rear) on 2025 4runner SR5 IMG_3156

clarkdot7 · Monday at 6:21 PM

Van Solo said:
Left mine at 3" so we can add the winch soon, without the extra work.
yours does look good too!

Questions for the UCA where do the brackets it comes with actually go? That was the only thing we didn’t install because we couldn’t figure it out

Van Solo · Monday at 10:42 PM

clarkdot7 said:
Questions for the UCA where do the brackets it comes with actually go? That was the only thing we didn’t install because we couldn’t figure it out

They are ABS line brackets

clarkdot7 · Monday at 10:46 PM

Van Solo said:
They are ABS line brackets

Do you have a picture possibly of where it was installed

ARB OME MT64 Suspension Lift Kit (2.5 inches front / 2 inches rear) on 2025 4runner SR5

clarkdot7

Member

MikeD

Well-known member

suremang

Member

Van Solo

Well-known member

clarkdot7

Member

Van Solo

Well-known member

clarkdot7

Member

Van Solo

Well-known member

clarkdot7

Member

Similar threads