- Thread starter
- #1
Hello Everyone,
I was fortunate enough to be a tester for the Zekzoop Window Visor.
Intitial thoughts:
Packaging
1. Visors were packaged well in a sturdy box.
2. Visors were individually wrapped in plastic then inserted inside individual foam sleeves.
3. Hardware included gloves/8 clips/4 individual adhesion promoter packets/installation tool all in a sealed plastic zip.
4. Installation instructions.
Visors
1. Very aesthetically pleasing design.
2. Material is tinted and attractive.
2. Fitment was very precise
3. 3M tape secures the visor inside the window wells.
4. Clips in each corner of the window wells secure the visors in place.
Installation
1. As with all double sided 3M tape, it's very tedious to start the tape. This is no fault of Zekzoop.
2. I did each window individually...adhesion promoter, then installed.
3. The install video makes this very easy and quick.
Overall Thoughts
I've installed Window Visors both in channel and outer window installs. The only outside the windows install that I liked was for my 2015 Subaru Forester XT. It was an OEM Subaru part and the fitment along with the seamless look was very nice. Most of the designs I have seen imho...were too big and flared out too much. I requested to be a tester for Zekzoop due to the low profile nature of the in-channel fitment. It took me about 15min to install all 4 windows...and currently, curing (24hrs with windows closed). I took it for a quick drive and notice no difference in wind noise. I will update this after the cure. So far, I am very pleased with the quality, fitment, and aesthetics of this window visor. I'd like to thank Zekzoop for selecting me to be a tester.
I was fortunate enough to be a tester for the Zekzoop Window Visor.
Intitial thoughts:
Packaging
1. Visors were packaged well in a sturdy box.
2. Visors were individually wrapped in plastic then inserted inside individual foam sleeves.
3. Hardware included gloves/8 clips/4 individual adhesion promoter packets/installation tool all in a sealed plastic zip.
4. Installation instructions.
Visors
1. Very aesthetically pleasing design.
2. Material is tinted and attractive.
2. Fitment was very precise
3. 3M tape secures the visor inside the window wells.
4. Clips in each corner of the window wells secure the visors in place.
Installation
1. As with all double sided 3M tape, it's very tedious to start the tape. This is no fault of Zekzoop.
2. I did each window individually...adhesion promoter, then installed.
3. The install video makes this very easy and quick.
Overall Thoughts
I've installed Window Visors both in channel and outer window installs. The only outside the windows install that I liked was for my 2015 Subaru Forester XT. It was an OEM Subaru part and the fitment along with the seamless look was very nice. Most of the designs I have seen imho...were too big and flared out too much. I requested to be a tester for Zekzoop due to the low profile nature of the in-channel fitment. It took me about 15min to install all 4 windows...and currently, curing (24hrs with windows closed). I took it for a quick drive and notice no difference in wind noise. I will update this after the cure. So far, I am very pleased with the quality, fitment, and aesthetics of this window visor. I'd like to thank Zekzoop for selecting me to be a tester.
Sponsored
