Sponsored

TRD Pro Grill Light Bar Gap - SS20

Sp00n

TRD Off-Road Premium
Member
Joined
Mar 14, 2026
Threads
3
Messages
12
Reaction score
5
Location
Arizona
Vehicle(s)
2025 4Runner
So I recently just installed the TRD pro grill on my 2025 ORP, along with that I installed the SS20 Light bar and SS6 Fog lights from Diode Dynamics. After putting the front bumper back on, I noticed a gap where the light bar meets the grill, and I can see the clips that hold the grill in place. Is this normal or should it be sitting more flush? Cause I have a feeling, I might be pinching a wire or something, causing it to bulge out. Linked a video for example.

Sponsored

 

TheMountain74

TRD Pro
Active member
First Name
Dave
Joined
Dec 4, 2025
Threads
6
Messages
44
Reaction score
19
Location
USA
Vehicle(s)
2025 4Runner
you ever get that gap fixed? is there any actual step by step instructions of how to put together the NEWEST SS6 fog lights, i'm so confused on how the brackets, and extra bolts/brackets its suppose to be put together. As all the video's/instructions i've seen are for the OLD SS6 fog lights.

Could you tell me what the brackets in blue are for?
Which is suppose to connect direction to the back of the SS6 light, the one in Purple? or the H11 Backlight Kit? And or what is the difference between the two? they both look like the go to the back of the SS6 light.
Also what are the screw and washers circled in green for, I see in the installation videos, they had 4 of the same washers and is meant for the factory screws in the bumper.

2025 2026 4runner 6th gen TRD Pro Grill Light Bar Gap - SS20 image0


This is what my kit came with am I missing anything and or did they give me some wrong pieces? Did yours come with the Classic-to-New Gen adapters ?
2025 2026 4runner 6th gen TRD Pro Grill Light Bar Gap - SS20 image0 (1)
 

ngfilla94

TRD Sport Premium
Well-known member
First Name
Nathan
Joined
Jun 22, 2024
Threads
25
Messages
126
Reaction score
188
Location
St. Peters, MO
Vehicle(s)
2025 TRD Sport Premium
So I recently just installed the TRD pro grill on my 2025 ORP, along with that I installed the SS20 Light bar and SS6 Fog lights from Diode Dynamics. After putting the front bumper back on, I noticed a gap where the light bar meets the grill, and I can see the clips that hold the grill in place. Is this normal or should it be sitting more flush? Cause I have a feeling, I might be pinching a wire or something, causing it to bulge out. Linked a video for example.


The gap is normal. I've got an in depth install write up and I have the same gap.
 
 







Top