Picture Request... Anyone running 17x8.5 +25 w/ 315/70/17 tires and 2.5 inch lift.

[Unit38]

Hi everyone,

Been lurking for a minute, I just picked up a 2025 Trailhunter in IceCap.

I'm looking for some specific pictures, I purchased Westcott preload collar kit and I plan to purchase RRW RR7, 17x8.5 +25 and plan to add 315/70/17 Territory MTs. I can't seem to find many pictures of that particular set up. Most are +35 and 0. I'm looking to see some pics of the stance and how well the 315s with a +25 fill out the wheel wells esp. with the trailhunters larger flares, but any 4runner will do.

Thx
Joe

Sponsored

 

[odins_beer'd]

I have a 3in front and 2in rear lift that probably sits closer to 2.5 with the tent.

My tires are 295/75R/17. So same diameter, yours would just be a bit wider (~0.8). Wheels are 17x8.5 +25

These are the only pictures Ihave currently, just had it done and been out of town.

 

[Unit38]

I have a 3in front and 2in rear lift that probably sits closer to 2.5 with the tent.

My tires are 295/75R/17. So same diameter, yours would just be a bit wider (~0.8). Wheels are 17x8.5 +25

These are the only pictures Ihave currently, just had it done and been out of town.

Nice, do you get any poke with that size? I'm trying to get a sense with the TH flares if the tire would poke or be pretty even with the TH flares given their a little wider... Thx

 

[odins_beer'd]

I'll take some better picture later today. I do get a bit of poke albeit nothing crazy. Mind you, with your tire size you would get an additional ~0.4in of poke. My width is ~11.6 while yours would be ~12.4.

Worth noting, I did have to remove the crash brackets (6 bolts total, very easy) and then unscrew the plastic piece in the front of the wheel well. Now I have no rub. ARK makes a crash bracket delete cover that I installed for 50 bones that blocks off the gap afterwards.

 

[Unit38]

I'll take some better picture later today. I do get a bit of poke albeit nothing crazy. Mind you, with your tire size you would get an additional ~0.4in of poke. My width is ~11.6 while yours would be ~12.4.

Worth noting, I did have to remove the crash brackets (6 bolts total, very easy) and then unscrew the plastic piece in the front of the wheel well. Now I have no rub. ARK makes a crash bracket delete cover that I installed for 50 bones that blocks off the gap afterwards.

Thanks for the info and pics.

 

[odins_beer'd]

Hope this helps

 

[Unit38]

Hope this helps

Perfect thx, this is very helpful.

Your truck looks great!

 

[odins_beer'd]

Thank you! Happy to help

Sponsored