Parking light wire and Dome light/ courtesy door light wire location for trigger wires?

[n1comedes]

Was able to install the Diode Dynamics D Switch Panel, Baja Designs rock lights and Diode Dynamics C2 2.0 chase lights. First time ever working on electrical and it works! Does anyone know where I can tap the trigger wires (specifically the parking light wire and the dome light/ courtesy door lights wire) and what color wires they are? Thank you in advance.

Sponsored

 

[127.0.0.1]

courtesy light switches for front doors go to main body ecu 18 green or 19 violet

 

[n1comedes]

courtesy light switches for front doors go to main body ecu 18 green or 19 violet

Are you referring to the driver side behind the aux switches?

 

[rocktheroad]

Are you referring to the driver side behind the aux switches?

Did you had any progress on this? I just got mine D-Switch, and I was trying to figure out this too….

Here is what I found, and keeps me puzzled:

D-Switch sensor wires need a simple +12V signal, not CAN/LIN/message-based signals. The D-Switch guide says the accessory harness sensor wires require 12VDC discrete signals and will not work with CAN, LIN, CXPI, or other message-based protocols.

 

[n1comedes]

ive found some other forums similar that might be close to what we are looking but I dont know if i personally want to do it. Asked around some shops and they be quoting me $500. So i might just wait a bit til more people get the d switch panel and are able to figure it out. Im not experienced with electrical so idk if any of these forums make sense to you

https://www.tacomaworld.com/threads/upgraded-wide-view-side-mirrors-for-2025-tacoma-sport.872314/

 

[rocktheroad]

We are in the same boat

I even managed to break the closing lid of the D-Switch right after I opened the package. So, I’ll wait until someone figures it out. I’ll post here if I find any other information!

Sponsored