OME MT64 Old Man Emu Suspension w/ UCA (Part #2135K) + Timbren Active Off-Road Bumpstops -- Installation & Review...by Van Solo

[Van Solo]

Great write-up and your 4Runner, nicely done! Would you be able to measure from the center wheel hub to the bottom of the fender flare as I would like to see what was the actual height you obtained

HERE!

Sponsored

 

[Daronc]

HERE!

HERE!

Thanks for the measurements. It looks like you got 2” over stock height. Was the the clip set on the highest setting

 

[Van Solo]

Thanks for the measurements. It looks like you got 2” over stock height. Was the the clip set on the highest setting

The kit 2135K comes ready to go @ 3" Front and 2" Rear so ya!
Not going to take it apart to find out im pleased with it the way it sits now!

 

[Van Solo]

Maybe some 285/75R17's for that extra bit…..

 

[Van Solo]

Update: @Marie_ARB

We are adding the DobinsoDobinson rear springs and came to the conclusion we wanted to remain with @ARB or Old Man Emu so in the meantime we wil add the Dobinsonting @ARB we got confirmation that heavier springs are in development ?! later this year…..,

We continued to consider Dobinson rear springs and came to the conclusion we wanted to remain with @ARB or Old Man Emu so in the meantime we wil add the Dobinson Rear coil spacer on August 5th, 2026 stay tuned….photos and install video coming on this date !

Toyo Open Country AT3
285/75R17
E Load / 10 Ply

Blackhorn NS5
17x8.5 ET25
6x139.7

Old Man Emu
MT64 2135k
3” Front
2" Rear + Dobinson 15mm Rear Coil Spacer = 2.6" Total Lift in the rear.

Sponsored