2025 Underground 4Runner TRD Off-Road Build - Time to Enjoy!!!

[JCP]

Same type off roading you are describing. I just know the Coilover set up is the right way to go and that perfection drives me a bit (OCD tendencies)

Man, that OCD tendency is what's driving me to spend the extra $$$ for the MT64 Which coilover set are you checking out?

Sponsored

 

[Franco]

Man, that OCD tendency is what's driving me to spend the extra $$$ for the MT64 Which coilover set are you checking out?

My buddy runs Wheel Pros so I was looking at the Falcon Ready Lift set

 

[JCP]

Do you mind posting photos of the tire poke? I'm considering offsets 25 and 12 since these are so light!

 

[JCP]

Congrats on your new ride! Great choice!
I'm SUPER HAPPY with my tire and wheel combo. When the installers said they were lighter than the smaller ones that were already on the truck I was so happy. Mission accomplished. MPGs actually seemed to have gone up 1-2mpg even tho they are taller and wider. (I generally get 14-18 and live in a hilly area)
The SST lift has worked flawlessly for me. No issues at all, rides great and is really all I need for the type of driving and off roading I do.
I know the coilovers are better but you are talking $2k-3K more and not a "need to do for me". If you do some heavy off roading I would say spend the money. That is an expensive ride so don't be afraid to do what you need to do.
Hope this helps

With the wheel offset +12 do the wheels line up with the fender, or do they poke a bit?

 

[Franco]

With the wheel offset +12 do the wheels line up with the fender, or do they poke a bit?

Sorry - Here are some photos. The tread sticks out about 1" vs the +25s I had that only the sidewall stuck out past the fender. Hope this helps

 

[JCP]

Sorry - Here are some photos. The tread sticks out about 1" vs the +25s I had that only the sidewall stuck out past the fender. Hope this helps

All good! It does help knowing the tread sticks out about 1". Would you say the lip of the wheel lines up with the fender?

 

[Franco]

All good! It does help knowing the tread sticks out about 1". Would you say the lip of the wheel lines up with the fender?

No probably out past the fender by 3/4 inch

 

[Franco]

All good! It does help knowing the tread sticks out about 1". Would you say the lip of the wheel lines up with the fender?

This is from the top of the front fender

 

[JCP]

I like it

Sponsored