Sponsored

RTX 95.1 Bore Wheels Don't Fit 2026 4Runner Sport

sachelis

TRD Sport Premium
New member
First Name
Steve
Joined
Oct 30, 2026
Threads
1
Messages
4
Reaction score
6
Location
Salt Lake City UT
Vehicle(s)
2026 Toyota 4Runner Sport Premium
I recently bought a 2026 4Runner Sport (Premium) which comes with 20" wheels. I ordered RTX "083168 OE-Series TY-03 Wheel [Size: 18" x 8"] Satin Black Finish" from Jegs. Both are listed with a hub 95.1 bore. However, when I went to have them installed (at Discount Tire), the wheel wouldn't fit over the hub. I felt the hub and wheels, and there weren't any burs.

I called Jegs in the hope that I could return them without paying $135 in shipping, and they said the 4Runner has a 95.2 mm center bore, and they refused to pay shipping. Everything I saw pre-sale said 95.1, although I do see a thread saying 95.1/95.2 and "it's so minor it really doesn't matter").

I guess I'm just posting because I'm frustrated, unless someone has a miracle suggestion.
Sponsored

 

Nodak

Platinum
Well-known member
First Name
JR
Joined
Jan 22, 2025
Threads
71
Messages
2,981
Reaction score
1,664
Location
ND
Vehicle(s)
2026 4R Platinum Underground, 2025 4R Platinum Heritage Blue

Nodak

Platinum
Well-known member
First Name
JR
Joined
Jan 22, 2025
Threads
71
Messages
2,981
Reaction score
1,664
Location
ND
Vehicle(s)
2026 4R Platinum Underground, 2025 4R Platinum Heritage Blue
2025 2026 4runner 6th gen RTX 95.1 Bore Wheels Don't Fit 2026 4Runner Sport Wheels Specs 2025 4Runner



2025 2026 4runner 6th gen RTX 95.1 Bore Wheels Don't Fit 2026 4Runner Sport Wheels Specs Tacoma 2024+



2025 2026 4runner 6th gen RTX 95.1 Bore Wheels Don't Fit 2026 4Runner Sport Wheels Specs Tundra 2022+




2025 2026 4runner 6th gen RTX 95.1 Bore Wheels Don't Fit 2026 4Runner Sport Wheels Specs Sequoia 2022+
 

Nodak

Platinum
Well-known member
First Name
JR
Joined
Jan 22, 2025
Threads
71
Messages
2,981
Reaction score
1,664
Location
ND
Vehicle(s)
2026 4R Platinum Underground, 2025 4R Platinum Heritage Blue
something doesnt add up unless the wheel bore was ground in-correctly

per the specs you linked it should have fit.

i went with a 106 bore but had to use a hub centric ring since not too many aftermarket run that small a bore.

its usually easier to have a large bore and use a hub centric ring so you can fit more vehicles than if you limited yourself to a small set of vehicles running that small of a hub

edit : being that close to 95.1, just a hair off in grinding out that bore or the hub on the vehicle being ever so slight out of round could cause issues.

you have no cushion for errors in the wheel
 

Nodak

Platinum
Well-known member
First Name
JR
Joined
Jan 22, 2025
Threads
71
Messages
2,981
Reaction score
1,664
Location
ND
Vehicle(s)
2026 4R Platinum Underground, 2025 4R Platinum Heritage Blue
ok it looks like the website that tracks oem wheel specs has changed the hub bore on the 6th gen to 95.2

so technically 95.1 will not fit.


2025 2026 4runner 6th gen RTX 95.1 Bore Wheels Don't Fit 2026 4Runner Sport 1794941186625-5
 

Nodak

Platinum
Well-known member
First Name
JR
Joined
Jan 22, 2025
Threads
71
Messages
2,981
Reaction score
1,664
Location
ND
Vehicle(s)
2026 4R Platinum Underground, 2025 4R Platinum Heritage Blue
your best bet if jegs wont take them back (which i am pretty sure they wont since i went thru the vehicle configurator and even it says it wont fit)

is to find a wheel shop to grind out 1mm on the bore of the wheels maybe.
 

pistol

TRD Off-Road Premium
Well-known member
Joined
May 28, 2026
Threads
6
Messages
87
Reaction score
132
Location
OR
Vehicle(s)
2026 Everest TRD ORP
ok it looks like the website that tracks oem wheel specs has changed the hub bore on the 6th gen to 95.2

so technically 95.1 will not fit.


1794941186625-5e.webp
1/10 of a millimeter difference will absolutely not prevent a wheel from sitting over a hub.

I would get some calipers and measure the wheel bore.
 

Nodak

Platinum
Well-known member
First Name
JR
Joined
Jan 22, 2025
Threads
71
Messages
2,981
Reaction score
1,664
Location
ND
Vehicle(s)
2026 4R Platinum Underground, 2025 4R Platinum Heritage Blue
1/10 of a millimeter difference will absolutely not prevent a wheel from sitting over a hub.

I would get some calipers and measure the wheel bore.
it will if the hub is 95.2 and the wheel is 95.1 and the tech cant get the wheel on the hub without using excessive force to get it on.

if i was a wheel tech, i would err on the side of caution and not force it. the liability and the way some people are, i wouldnt chance it and i am pretty sure management would dump that error on you if something became of it.

in the grand scheme of things, .1 mm is barely anything but i would guess the axle hub and the wheel not being exact might make it more than .1 mm difference.

the really bad point is jegs website configurator says the wheel doesnt fit a 6th gen 4runner.
 

pistol

TRD Off-Road Premium
Well-known member
Joined
May 28, 2026
Threads
6
Messages
87
Reaction score
132
Location
OR
Vehicle(s)
2026 Everest TRD ORP
Brother I'm telling you 0.00393701 inches will not keep a wheel from fitting on a vehicle, something else is going on here.

Also I really hope this guy didn't pay $260 a pop for these knockoffs. I bought actual trd wheels straight from toyota for almost half that.
 

josiahg52

Trailhunter
Well-known member
First Name
Josiah
Joined
Jun 6, 2026
Threads
3
Messages
434
Reaction score
229
Location
Maine, United States
Vehicle(s)
2026 Trailhunter, 2018 Ram 2500, 2001 BMW M5, 2001 BMW X5 35d
I can understand the frustration, especially with wheels advertised as fitting the vehicle. A difference of 0.1 mm (about 0.004") is certainly enough to prevent installation if those are the actual dimensions.

If it were mine, I'd first try to establish the actual dimensions with an inside bore micrometer or bore gauge and an outside micrometer on the hub. If the bore genuinely needs enlarging, a competent machine shop can indicate the wheel in and machine it to the proper finished dimension. I've had wheels repaired by a machine shop before with excellent results.

But before modifying anything, I'd want to establish whether the wheels were manufactured incorrectly, finished incorrectly, or simply specified incorrectly for the application. If they're advertised to fit, that's ultimately something the seller or manufacturer should be able to explain.

I'd also like to know is Toyota's actual hub-pilot specification, including its manufacturing tolerance, and the wheel manufacturer's specified finished bore diameter and tolerance. The advertised 95.1 mm versus 95.2 mm figures don't necessarily tell us what either component actually measures or what clearance was intended.
 
OP
OP

sachelis

TRD Sport Premium
New member
First Name
Steve
Joined
Oct 30, 2026
Threads
1
Messages
4
Reaction score
6
Location
Salt Lake City UT
Vehicle(s)
2026 Toyota 4Runner Sport Premium
I didn't pay that price (I did an instant price match at jegs.com). I felt the hub and wheel, and they were smooth as a baby. The tire tech and I also tried a little forceful wiggle, and it definitely wasn't going on. I suspect that's why the specs were updated from 95.1 to 95.2. I didn't bother with calipers because I already had the perfect measuring tool--it didn't fit.
Sponsored

 
 







Top