Anybody know of where a 12v ignition signal is in the back of a TRD ORP Hybrid?

[PdlMnk]

Long story short, hooking up the OEM compressor. It requires a 12v ignition signal to allow it to power on. I can't easily find one in the rear area. I know I could run a wire to the front, but I really want to avoid that, if possible.

I tried looking around the web, but no luck.

Sponsored

 

[Vincenzo]

You have 12 volts at the trailer harness. You also have running lights that could also be of use if you are just looking for a signal

 

[calvincartier]

I’m not 100 pct sure but if you pop/open that wheel well area there may be a 12V connector there.

 

[BruceB]

Have you seen this YouTube video by Ed Martin Toyota?

How to install the OEM On-board Air Compressor

 

[PdlMnk]

T

Have you seen this YouTube video by Ed Martin Toyota?

How to install the OEM On-board Air Compressor

Yes, unfortunately, my 50amp fuse is missing a leg so there is no power to my connector.

 

[PdlMnk]

I found one in the fuse box under the glove box. Luckily, it's an empty slot with blades in it. I'll post more once I hve it complete. but it's 104F today, so It's not happening today.

Sponsored