-
🙋🏻♂️ 2025-2026 4Runner Owners (Delivered) List: 👉 Add Yours Here!
📋 2025-2026 4Runner Allocations List (Nationwide): 👉 See The Daily Updated List Inside!
Sponsored
PdlMnk's latest activity
-
PdlMnk replied to the thread Anybody know of where a 12v ignition signal is in the back of a TRD ORP Hybrid?.I found one in the fuse box under the glove box. Luckily, it's an empty slot with blades in it. I'll post more once I hve it complete...
-
PdlMnk replied to the thread Anybody know of where a 12v ignition signal is in the back of a TRD ORP Hybrid?.T Yes, unfortunately, my 50amp fuse is missing a leg so there is no power to my connector.
-
PdlMnk posted the thread Anybody know of where a 12v ignition signal is in the back of a TRD ORP Hybrid? in Electronics, Electrical, Stereo, Nav, AUX, Comms, Cameras, Driving Aids, Remote Connect, App.Long story short, hooking up the OEM compressor. It requires a 12v ignition signal to allow it to power on. I can't easily find one in...
-
PdlMnk replied to the thread 360 Camera calibration / recalibration how-to instructions DIY.OK, I got it to work. Two things that I changed, not sure which helped, but turned off the ventilated seats (made sure nothing was on)...
-
PdlMnk replied to the thread 360 Camera calibration / recalibration how-to instructions DIY.haha, I meant 5. Typo :D
-
PdlMnk reacted to josiahg52's post in the thread 360 Camera calibration / recalibration how-to instructions DIY with
Like.
OP says five left to right, then five right to left. -
PdlMnk replied to the thread 360 Camera calibration / recalibration how-to instructions DIY.Does this work with the 2026 4Runners? I just tried it like 10 times, no luck. I tried small swipes, big swipes, full screen swipes...
-
PdlMnk replied to the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY.Thanks for that video, it helped a lot. I am still stuck on one thing, I need to run the ignition wire so that the module knows the...
-
-
PdlMnk reacted to pmedicj's post in the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY with Like.
It looks like you found the problem. I think your going to have to find a way to wire it to power with your own fuse like they did with...
-
PdlMnk reacted to Maximus4R's post in the thread 360 Camera calibration / recalibration how-to instructions DIY with Like.
Update: It works! I tried it without my phone paired (was happening automatically so I turned off Bluetooth) and it gives me the options...
-
PdlMnk replied to the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY.Probably a tall order, but if anyone is willing to check to see if they have the blade on both side of the 50amp fuse, I would be...
-
-
PdlMnk replied to the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY.Just in case there is any doubt this is the fuse, here are more pics.
-
-
PdlMnk replied to the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY.Holy shit! I think I found the problem. There is aan entire connector missing from one side of the 50amp fuse. The fuse is intact and...
-
-
PdlMnk replied to the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY.Thanks, yeah, had the 4runner running. For the TRD ORP Hybrid you have to cut the wire and wire it to ground so that it thinks it's...
-
PdlMnk replied to the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY.I'm wondering if anybody has this working on a 2026? I have a 2026, but I think most others are 2025?
-
PdlMnk replied to the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY.I did watch it like 50 times, somehow I always missed him saying "cut". Thanks for leading me back on the path :) That being said, I...
-
-
PdlMnk replied to the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY.Can anybody confirm if the brown wire needs to be tapped or cut?
-
PdlMnk reacted to Nodak's post in the thread Installed Bulletpoint RubiGrid Mount (14" screen) with Like.
the only thing that i could find (a while back) that didnt involve mounting and just a slide in plug and play solution...
-
PdlMnk replied to the thread Installed Bulletpoint RubiGrid Mount (14" screen).Yeah, I saw that. Not my cup of tea though. I will wait for the rubigrid. Thanks!
-
PdlMnk replied to the thread Installed Bulletpoint RubiGrid Mount (14" screen).I know they are working on a 4Runner version. I wonder if it will be different?
-
PdlMnk replied to the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY.Thanks! And yeah, the loctite seems like s smart idea. I will do that as well.
-
PdlMnk reacted to pmedicj's post in the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY with Like.
I followed the Elmhurst video along with suggestions from here and it went smoothly. I also bought a trim removal tool which greatly...
-
PdlMnk replied to the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY.Thank you!
-
PdlMnk reacted to abstraakt's post in the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY with Like.
Thanks! Just a few general comments: Take your time Organize all of your removed trim panels and hardware to make reinstallation go...
-
PdlMnk replied to the thread OEM Onboard Air Compressor (Tire Inflator) install complete using how-to DIY.Looks great! I just ordered the part, anything you wish you knew before tackling this? Tools? Trim pieces? Thanks!
-
PdlMnk replied to the thread 2026 TRD ORP - TRD 2.5" Lift Kit + Toyo R/T Trail 285/75R17 + KMC Technic 17x8.5 +18mm (slight trimming).It does rub a little when reversing into my driveway at full turn. I plan to trim it. Other than that, no rubbing. They did do a very... -
PdlMnk reacted to williej346's post in the thread 12v power extension (for hood hookup) in Hybrid iForce Max 4Runner (DIY) with Like.
Because Toyota moved the 12v battery to the back of the Hybrid 4Runner, it became difficult to wire in accessories such as lights and...
-
PdlMnk replied to the thread Does a quick release awning exist for the OEM roof rack?.Yes, you can certainly fabricate parts and I've looked into it. I posted something about that, but no replies. Ultimately, I think I...
-
PdlMnk replied to the thread 2026 TRD ORP - TRD 2.5" Lift Kit + Toyo R/T Trail 285/75R17 + KMC Technic 17x8.5 +18mm (slight trimming).I wantd a more aggressive tire. I actually wanted the R/T non-trail, but they were out of stock.
-
PdlMnk replied to the thread 2026 TRD ORP - TRD 2.5" Lift Kit + Toyo R/T Trail 285/75R17 + KMC Technic 17x8.5 +18mm (slight trimming).I had mentioned this earlier in the thread. --- Also, regarding rubbing. I purposely went with 285/75R17 and +18mm offset thinking that...
-
PdlMnk replied to the thread 2026 TRD ORP - TRD 2.5" Lift Kit + Toyo R/T Trail 285/75R17 + KMC Technic 17x8.5 +18mm (slight trimming).Thank you!
-
PdlMnk reacted to 26RunnerORP's post in the thread 2026 TRD ORP - TRD 2.5" Lift Kit + Toyo R/T Trail 285/75R17 + KMC Technic 17x8.5 +18mm (slight trimming) with Like.
Same tire and suspension set-up. Looking good sir!
-
PdlMnk reacted to emerson's post in the thread Aftermarket Wheels, Bigger Tires, Lift Kits (Compilation) for 2025+ 4Runner 6th Gen -- Add Yours! with Like.
Stock 18 with 35x12.50x18 and 1.25" spacer
-
PdlMnk replied to the thread HERITAGE BLUE Photos 4Runner 6th Gen (2025+).Update: TRD 2.5" lift kit now installed (photos below) Build so far: Screen protector Stealth 4Runner Lifestyle Sequential Turn... -
-
PdlMnk replied to the thread 2026 TRD ORP - TRD 2.5" Lift Kit + Toyo R/T Trail 285/75R17 + KMC Technic 17x8.5 +18mm (slight trimming).Ok, got back the truck. Looks amazing! Here's a few pics for now until I can get time to take better pics. Also, regarding rubbing. I...
-
-
PdlMnk replied to the thread Aftermarket Wheels, Bigger Tires, Lift Kits (Compilation) for 2025+ 4Runner 6th Gen -- Add Yours!.I can finally add to this thread! 2026 TRD ORP Hybrid - Blue Heritage Toyo Open Country R/T Trail LT285 /75 R17 128Q E1 BSW KMC KM722...
-
-
PdlMnk reacted to Donmega87's post in the thread 2026 4Runner Limited on Work Wheels with Toyo Open Country AT3 285/70/R17 Tires with Like.
Hey everyone, I'm new to the forum. Just got the huge 20s off my limited. Went with some work meister S1 s with some Toyo open country...
-
PdlMnk reacted to Henry's post in the thread 2026 TRD ORP - TRD 2.5" Lift Kit + Toyo R/T Trail 285/75R17 + KMC Technic 17x8.5 +18mm (slight trimming) with Like.
The wheels and tires look great! Any impressions / photos after the TRD 2.5" lift ?
-
PdlMnk replied to the thread 2026 TRD ORP - TRD 2.5" Lift Kit + Toyo R/T Trail 285/75R17 + KMC Technic 17x8.5 +18mm (slight trimming).Not yet! Dropped it off yesterday, waiting for the call to come pick it up today. Hopefully it'll be done soon!
-
PdlMnk replied to the thread Aftermarket Wheels, Bigger Tires, Lift Kits (Compilation) for 2025+ 4Runner 6th Gen -- Add Yours!.Update: TRD 2.5" lift kit now installed (photos below) Build so far: Screen protector Stealth 4Runner Lifestyle Sequential Turn...
-
-
PdlMnk posted the thread 2026 TRD ORP - TRD 2.5" Lift Kit + Toyo R/T Trail 285/75R17 + KMC Technic 17x8.5 +18mm (slight trimming) in Builds / Photos / Videos.Update: TRD 2.5" lift kit now installed (photos below) Build so far: Screen protector Stealth 4Runner Lifestyle Sequential Turn...
-
-
PdlMnk replied to the thread Cold air when AC is off?.That's because you have it on auto, it decides when to turn the a/c on and off, but as you probably noticed, it's blowing cold air...
-
PdlMnk replied to the thread UPDATE: I sold my Pro. "Selling my 2025 TRD Pro for a 2027 Ram RHO?".I just sold my 2020 Ram Rebel fully loaded for my TRD ORP Hybrid. not because I didn't absolutely love that truck. in fact, it was the...
-
PdlMnk replied to the thread What do you do for work?.Data Center Escalation Engineer. 30 years next month. Should be retired on or before Jan 2028 at 56.
-
PdlMnk replied to the thread DIY Awning setup for 2026 OEM Rails and Crossbars - Critique my design before I buy!.Or I could make my own bracket? Like this, all flat, but 6 t-bolts instead of 4???
-
-
PdlMnk replied to the thread DIY Awning setup for 2026 OEM Rails and Crossbars - Critique my design before I buy!.Awning bracket: Slimsport attaches to the last slot before the bend in the awning bracket above: Quick release (Items 2 is the one...
-
-
PdlMnk posted the thread DIY Awning setup for 2026 OEM Rails and Crossbars - Critique my design before I buy! in Racks, Carriers, Cargo Systems, Ladders.There aren't many options for OEM crossbars and quick release awnings. After spending more time than I care to admit, I think I found...
-
PdlMnk replied to the thread 270 Awning on stock rails/cross bars.Thank you! This helps a lot! -
Not identical, but… https://a.co/d/04ycp7Mw
![20260906_115159[1].webp](https://cdn.4runner6g.com/data/attachments/39/39739-768ca03324a88d8510ec1ffb98f9183a.jpg)
![20260906_115242[1].webp](https://cdn.4runner6g.com/data/attachments/39/39740-f318a870761bca1bc9c12db6dca6ab15.jpg)
![20260906_114050[1].webp](https://cdn.4runner6g.com/data/attachments/39/39738-13352433b225407dab46f3f86f7f9261.jpg)
