EVEREST Photos 4Runner 6th Gen (2025+)

[RyanMort]

New 2025 Off Road Premium (Everest) - After Market Build.
2.5" ReadyLift
285/75/R17 Toyo Open Country - C Class
SCS Blaze 10 Wheels +20 offset
Tinted front windows

Ready to rock in Boulder, CO and Colorado excursions this summer!
Thanks to Corwin Toyota After Markets Team; Ryan. Highly rec.

Sponsored

 

[RdMick]

New 2025 Off Road Premium (Everest) - After Market Build.
2.5" ReadyLift
285/75/R17 Toyo Open Country - C Class
SCS Blaze 10 Wheels +20 offset
Tinted front windows

Ready to rock in Boulder, CO and Colorado excursions this summer!
Thanks to Corwin Toyota After Markets Team; Ryan. Highly rec.

Nice looking ride. Did you have to do any cutting or modification to fit? I'm waiting on my westcott kit and will be going with a similar set up size wise.

 

[RyanMort]

Nice looking ride. Did you have to do any cutting or modification to fit? I'm waiting on my westcott kit and will be going with a similar set up size wise.

Hey there. No, didnt need any BMC which was nice.

 

[Keroppi]

Everest 2025 4Runner TRD Off-Road Premium build modified with:

ReadyLift 2.5" Lift Kit
Fuel Rebel 17x9 0 Offset Wheels
Mickey Thompson Baja Boss AT 295/70/17 Tires

VIDEO -

 

[taquito.vonito]

My ORP in Everest.

ReadyLift 2.5” front/ 1” back
Icon Alloy Anza Alloy 17x8.5 +25 offset
35x11.5R17 Wildpeak At4w

No rubbing after removing front crash bar assembly and tucking in the front liner (remove screw and push in liner and then place the screw back in and the screw end will hold the liner back)

 

[kzrman]

Recently got my Trailhunter and I absolutely love it! It's everything that I was hoping for.
I'm 6' 2" and was worried that the roof would be too low, but very thankfully I've got enough room.

Since the Trailhunter already is fairly well outfitted for off-road use, and I don't expect to be going on demanding trails my build was kept conservative.

Here is the list:

Q – Car Care complete ceramic coating.
Hood vinyl mat black wrap.
Front half PPF

18x9 Method MR701 BLK PAINT rims

LT265/70R-18 BFGoodrich All-Terrain T/A KO3 E

Husky Liners Aeroskin II Hood Protector
https://www.amazon.com/dp/B0DRLF6SKS?ref=ppx_yo2ov_dt_b_fed_asin_title

Dashboard Behind Screen (14-Inch) Storage Box
https://www.amazon.com/dp/B0DM4NGMJ8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

VTT OBD-Lock ODB Port Locking Tool
https://www.amazon.com/dp/B0DCZVZKRR?ref=ppx_yo2ov_dt_b_fed_asin_title

AJT Design Injection key Fob
https://www.ajtdesign-llc.com/colle...ction-fob-if020-2022-tundra-2024-tacoma-black

Toyota OEM JDM Premium Horns
https://www.stickerfab.com/products/toyota-oem-jdm-premium-horns-2024-land-cruiser-gx550

Redline Tuning Hood QuickLIFT struts
https://www.amazon.com/dp/B0DBR8HMN2?tag=stickerfab-20&linkCode=ogi&th=1&psc=1

 

[taquito.vonito]

Yosemite road trip ?
This color is a certified neck breaker ?

 

[kayleighk116]

27 Miles on the new Trailhunter!

 

[kayleighk116]

Drone shots of the Trailhunter.

 

[SuthrnT4R]

3.5 Inch Rough Country Lift

17" - Bronze DX4 Pocket Wheels - 0 Offset

285/70R17 Cooper Stronghold A/T

Bronze Badge Overlays

Eventually I'm going to PPF the entire vehicle.

Also, my 85 22RE DLX

 

[MDD_TRD]

New 2025 Off Road Premium (Everest) - After Market Build.
2.5" ReadyLift
285/75/R17 Toyo Open Country - C Class
SCS Blaze 10 Wheels +20 offset
Tinted front windows

Ready to rock in Boulder, CO and Colorado excursions this summer!
Thanks to Corwin Toyota After Markets Team; Ryan. Highly rec.

What tint % did you do?

 

[E.T.]

Been following this sweet Everest TRD ORP build by @Overlanddaddy.

Mods list:

CBI Covert Front Bumper
CBI Lower Control Arm Skids
CBI Rock Sliders
Warn VR EVO 10-S Winch
Factor 55 Fairlead
Factor 55 Ultrahook
Peak Suspension lift kit
Peak Suspension upper control arms
Method 703 Wheels
Nitto Terra Grappler G3 A/T Tires - 285/70/17
Prinsu roof rack with window accessory panel
Prinsu ladder
@Diode Dynamics SS5 CrossLink 8-Pod LED Light Bar
@Diode Dynamics D-Switch 8-Channel Switch Panel
Amber vinyl on fog lights

 

[Vildhjarta]

Finally took my 6th Gen ORP on a proper trip and had to get some photos of my everest build!

No trimming or rubbing with this tire setup, only had to remove the crash bracket, mudguards and moved the front lining forward a little.

The mod list... So far:

Westcott Designs pre-collar lift 2.5 /0.75
Method 703 Double Black 17" +35mm offset
Falken Wildpeak 285/75/17 (C load rating)
0 degree rock sliders
Rigid Industries Yellow SAE Fog Lights
Beatsonic Amplifier

 

[Stormie_SS]

I haven't done much for upgrades but one I knew for sure was going to be new wheels to get rid of the bronze stock wheels. The tires rub on the plate behind the passenger front where the mudflap would be. I've removed the felt piece that covers that plate and pinned back the felt on the bottom corner of the front bumper.

Next up will be pre-ordering the Westcott preload collar lift.

So far with the limited driving I've done since install, the vibration I was having in the floor/seats seems to be nearly non-existent. Hopefully that remains the case after some more miles.

Edited to add photos of where the tires are rubbing and the felt piece I removed. For the felt at the front of the bottom of bumper we unscrewed it and pushed it back and drilled a new hole and put the screw back in.

Everest Trailhunter Build so far:
ReadyLift hood struts
JDM Horns
Lasfit Floor Mats
Ceramic window tint
KMC Riot 18x9 +18 offset
Falken Wildpeak A/T4W 285/70R18 - Load C

 

[Overlanddaddy]

Hey all! Allow me to finally introduce myself! There has been posts of my build and I greatly appreciate it as I'm not very active on forums. My name is Sanbert from the Bay Area, CA and took ownership of my 6th gen TRD ORP Everest at the end of March. Ever since then it has been non stop building, car shows, events, and finally for the first time I just recently taken it out to play since it's semi done for now.... I'm Most active on IG: Overlanddaddy if you want to get a hold of me, have questions, etc.

There may be some pictures you've seen already but if not enjoy!
I also have to Disclose that some of these companies are a sponsor/ affiliate of the build.

The Build so far from the ground up:

-Nitto Terra Grappler G3 LT285/70R17 (Sponsored)
-Method 703 17 in Bronze +35 offset
-CBI LCA Skid Plate (Sponsored)
-Peak Suspension 2 Piece Summit kit 2.25 Lift- 2" rear Spring Spacer (Sponsored)
-CBI Full Skid Plate (Sponsored)
-CBI Rock Slider w/ Kick Out (Sponsored)
-CBI Covert Front Bumper (Sponsored)
-Warn Winch VR Evo 10S
-Factor 55 FairLead and UltraHook
-CBI Ditch Light Bracket (Sponsored)
-Prinsu Ladder (Sponsored)
-Rigd Supply UltraSwing w/ UltraTable
- @Diode Dynamics (Ambassador) #DiodeAmbassador [Use Code: Overlanddaddy at checkout]
a. D-Switch Control Panel
b. SS3 LED Light Pod w/ Amber BackLight For Ditch Lights
c. SSC2 LED Light Pod w/ Amber Backlight For Chase Lights
d. SS5 CrossLink 7 LED Light Bar
e. Diode Dynamics Yellow Light Covers On All Light Pods
-Prinsu Pro Roof Rack (Sponsored)
-Prinsu Pro Accessory Panels For Both Driver and Passanger (Sponsored)
-2 Gallon RotoPax For Fuel On Driver Side
-Agency 6 Red Shovel And Mount Combo On Passenger Side
-Harbor Freight Tan Case (Forgot The Size) On passenger Side
-IronMan DeltaWing 180 Awning
-2 Pairs of Maxtrax O.D. Green and Tan
-Roam Case 95L with Mounts
-Oregon Outdoor Designs Drawer System
-IceCo Freezer APL55 (Affiliate) [12% Off Code: Overlanddaddy]
-Klean Freak Ambassador [20% Off Code: Overlanddaddy]

Sponsored