What did you do to your 6th Gen 4Runner today?? 👨🏻‍🔧 🧰 🛠

[TMLifer]

Just replaced the factory installed stock Road Runner sounding horn with the Toyota Premium horn (Part# 08522-60020). The new Toyota Premium horn sounds a lot better! It's what a horn should sound like on the 4Runner.

The torque spec for each bolt is 12 Nm (or approximately 106 inch/lbs.).

Sponsored

 

[BonRunner]

Changed out regular TRD center cap to TRD Pro style.

 

[Gerardo]

Just replaced the factory installed stock Road Runner sounding horn with the Toyota Premium horn (Part# 08522-60020). The new Toyota Premium horn sounds a lot better! It's what a horn should sound like on the 4Runner.

The torque spec for each bolt is 12 Nm (or approximately 106 inch/lbs.).

@TMLifer Nice! Is the part number missing a digit or wrong number? I just tried searching using the part number you shared and nothing comes up. Thank you!

 

[TMLifer]

@TMLifer Nice! Is the part number missing a digit or wrong number? I just tried searching using the part number you shared and nothing comes up. Thank you!

@Gerardo You can buy it from Amazon. Here's the link: https://a.co/d/09rUFaLI

 

[TMLifer]

SXTH Cold Air Intake. Great mod & easy to install although I'm disappointed at the spider cracks on the plexiglass cover's magnetic points.

Did SXTH ship a new cover to you?

 

[TMLifer]

FitcamX 4k front and 1080p rear dash cam install. OEM fit. Plug and play. Better than Toyotas bulky dashcam with less resolution.

@Formidable How difficult was it to route the cable for the rear camera? Did you have to remove headliner and / or use fish tape to fish the cable through?

 

[BonRunner]

Did SXTH ship a new cover to you?

Yea, issue has been resolved. Got new cover.

 

[Kyle_Williams91]

This weekend's upgrades:

• Amber fog light lenses from @StickerFab
• OEM cargo area lights
• OEM Land Cruiser LC250 front skid plate

What hardware did you use to attach LC skid plate?

 

[js_panda_rnr]

What hardware did you use to attach LC skid plate?

Same hardware that was securing the plastic shields that came stock. Just need two less. The LC plate comes with hardware as well but I just used the existing.

 

[outdoorCO]

Got it dirty in the CO mountains.

 

[Formidable]

@Formidable How difficult was it to route the cable for the rear camera? Did you have to remove headliner and / or use fish tape to fish the cable through?

I had this professionally installed by a shop. Supposedly super easy install. Took less than 1h total. He said he hid the wire under the plastic panels so no removal of head liner necessary. There’s a mounting button on Amazon that allows you to mount the rear camera to the push clip holding the headliner up. It’s in the fitcamx thread.

 

[TMLifer]

Land Cruiser front skid plate installed. Should be more than adequate for my needs.

It looks great! I installed a TRD skid plate. I'm thinking of also installing a skid plate on my rear differential.

 

[TMLifer]

This is what.... My dealer did to my 4Runner today...

What the heck did the dealer do (or not do)? Did they forget to torque or tighten the lug nuts? Seems to be the result of negligence by the dealer.

 

[bumyoon]

What the heck did the dealer do (or not do)? Did they forget to torque or tighten the lug nuts? Seems to be the result of negligence by the dealer.

They didn't torque it down. The lug nuts started coming off 0.8 miles down the road. I slowed down and started pulling to the parking lot as soon as I heard weird noises . was lucky the wheel didn't come off on the road.

 

[Kyle_Williams91]

Raptors installed, underground paint match rearview mirror buckets, and smoked sequential turn signals.

Part numbers? I also have underground 4R

Sponsored