Suspension Torque Values / Specs List (6th gen 4Runner 2025+)

[alldogsoffroad]

Hello friends,

As more people look to DIY their suspension installs they're going to be seeking torque specs / values / figures for the front and rear suspension. Here is a list that we've compiled so far from various sources. We will continue to add to the chart as needed. If anything looks out of place let us know and we will make corrections!

Component	Ft/LB
Front Upper Tophat Nut	33
Front Shock Upper Stem Nut	48
Front Shock Lower Bolt	195
Front UCA Ball Joint Nut	92
Front UCA Mounting Bolt	145
Front LCA Ball Joint Nut	117
Front LCA Ball Joint Bracket to LCA Bolts	221
Front LCA Cam Bolt	103
Front Swaybar to End Link	159
Rear Shock Upper Stem Nut	39
Rear Shock Lower Bolt	77
Rear Swaybar to End Link	55
Rear Trackbar	115
Rear Lower Control Arms	103

Last updated - 12/16/25

Sponsored

 

[Scarlett]

Thank you for this!

 

[0801]

Doh, I just came across this *after* getting all the torque figures from the service/repair manuals (techinfo.toyota.com). This is rad, thanks for putting it together!

FWIW, numbers check out with RM figures for factory. TC UCA instructions (https://www.chaosfab.com/PDF/96524.pdf) note slightly different figures for thru-bolt (136ft/lbs) and ball joint nut (90ft/lbs), but close enough I suppose.

 

[0801]

May also be useful:

Tie rod (to steering knuckle, not lock nut): 89 ft/lb (then turn to align cotter pin)

Rear upper control arm: 103 ft/lb

Rear lateral control arm: 115 ft/lb

wheel/lugs: 97 ft/lb

Sponsored