SR5 with 33s & Westcott Preload Collar Lift vs. Stock SR5

[rgall927]

I figured someone might be looking for this kind of comparison photo between a stock SR5 and a lightly modified SR5 with some of the typical upgrades.

Right is a stock SR5
Left is an SR5 with 33" tires (285/70R17) & a Westcott Preload Collar Lift kit

Sponsored

 

[ThatSickRIp]

I figured someone might be looking for this kind of comparison photo between a stock SR5 and a lightly modified SR5 with some of the typical upgrades.

Right is a stock SR5
Left is an SR5 with 33" tires (285/70R17) & a Westcott Preload Collar Lift kit

Im definitely one of those someones, this is EXACTLY what Ive been looking for and the timing is crazy.

Ive got my 285/70s going on this weekend and I was planning on getting the WD lo pro rack. I was also looking at the WD pre load kit for after, but its all pending on how the 2 previous mods affect the 4R fitting in my abnormal garage.

I currently have roughly 2.5" of clearance in my garage for the shark fin antenna. The 285s should add 1.1" and the WD lo pro is lower than the antenna, so those 2 should be good.
If they are, I was planning on a small level for the front.

Are you using the full WD kit on yours? collar and spacer up front, puck in the back?

Really appreciate the post, the timing is unreal and exactly what Im looking for as we speak

 

[rgall927]

Im definitely one of those someones, this is EXACTLY what Ive been looking for and the timing is crazy.

Ive got my 285/70s going on this weekend and I was planning on getting the WD lo pro rack. I was also looking at the WD pre load kit for after, but its all pending on how the 2 previous mods affect the 4R fitting in my abnormal garage.

I currently have roughly 2.5" of clearance in my garage for the shark fin antenna. The 285s should add 1.1" and the WD lo pro is lower than the antenna, so those 2 should be good.
If they are, I was planning on a small level for the front.

Are you using the full WD kit on yours? collar and space up front, puck in the back?

Really appreciate the post, the timing is unreal and exactly what Im looking for as we speak

That’s crazy! I knew someone would be looking for this.

Yes I’m running the full kit - collar and spacer up front and puck in the back. Glad this helped you out!

 

[soulsea]

Hello neighbor … nice looking truck.

 

[nofriends]

What parts did you use for the lift? And factory wheels or after market?

 

[nofriends]

Where did you get that grille?

 

[rgall927]

Where did you get that grille?

Grill is OEM from Toyota (Part #53101-35170)
Lift is Westcott Preload Collar Lift Kit - Used the full kit front & rear
Wheels are aftermarket (Method MR318)

 

[rgall927]

Hello neighbor … nice looking truck.

That's a great looking truck! I remember seeing that on Westcott's instagram

 

[JM92]

I also have installed the Westcott design 2.5 front .75 rear preload collar kit to my 2026 ORP and added Mickey Thompson Baja boss 285’s

 

[rgall927]

I also have installed the Westcott design 2.5 front .75 rear preload collar kit to my 2026 ORP and added Mickey Thompson Baja boss 285’s

Looks awesome! Bronze wheels look great on Everest

Sponsored