Rokblokz Mud Flaps Installed on Trailhunter

[talmadge]

I loaned Rokblokz my Trailhunter so they could take their measurements to start making mudflaps for them. Got it back in 36 hours with a free set of flaps, a t shirt, and a 4Runner that was much cleaner than it was when I dropped it off.

The OEM flaps didn’t really have the right geometry to fold over rocks and would sound terrible when they scraped. These should do much better rolling over rocks and are also wider which may not be visually appealing to everyone but I can already tell does a much better job at blocking debris.

10/10 experience and product.

Sponsored

 

[RunnerRocks]

Thanks for the update and pics!

Any hole drilling required ?

I just contacted RokBlokz 10 days ago to inquire about availability. Told me they are in the works.

We had RokBlokz XL's on our 2020 Ranger for 5+ years. Great coverage and flexible while not being "flappy". The material feels indestructible.

Yours may extend a bit further out than on our Ranger.

 

[Nodak]

I loaned Rokblokz my Trailhunter so they could take their measurements to start making mudflaps for them. Got it back in 36 hours with a free set of flaps, a t shirt, and a 4Runner that was much cleaner than it was when I dropped it off.

The OEM flaps didn’t really have the right geometry to fold over rocks and would sound terrible when they scraped. These should do much better rolling over rocks and are also wider which may not be visually appealing to everyone but I can already tell does a much better job at blocking debris.

10/10 experience and product.

does the front extend low enough to ensure you dont get any debris on the rear door kick out that is protected by a rock chip film before the plastic wheel well trim? the oem mud flaps suck on this aspect.

trying to find a replacement for the oem mud guards. looked in rekgen's (have them on the 23 tundra, love them), not doing the $300 mud flaps from that armor brand. so looking for alts.

see yellow circle below ...

 

[gmarcucio]

I loaned Rokblokz my Trailhunter so they could take their measurements to start making mudflaps for them. Got it back in 36 hours with a free set of flaps, a t shirt, and a 4Runner that was much cleaner than it was when I dropped it off.

The OEM flaps didn’t really have the right geometry to fold over rocks and would sound terrible when they scraped. These should do much better rolling over rocks and are also wider which may not be visually appealing to everyone but I can already tell does a much better job at blocking debris.

10/10 experience and product.

WOW, thanks for sharing! And thanks for protecting my vehicle when I'm driving in back of you!

 

[kekecarioca]

I loaned Rokblokz my Trailhunter so they could take their measurements to start making mudflaps for them. Got it back in 36 hours with a free set of flaps, a t shirt, and a 4Runner that was much cleaner than it was when I dropped it off.

The OEM flaps didn’t really have the right geometry to fold over rocks and would sound terrible when they scraped. These should do much better rolling over rocks and are also wider which may not be visually appealing to everyone but I can already tell does a much better job at blocking debris.

10/10 experience and product.

Looks stunning.! Also besides folding over rocks it should keep rocks from flying and chipping the paint. I made these garage ones and it has helped a lot in that department.
Definitely getting those in the future.

 

[kekecarioca]

OP, did you mount a step there ?

 

[Sinnerman]

Very nice!!@ I'm waiting for their availability also! Thanks for sharing this update!

 

[talmadge]

OP, did you mount a step there ?

Yes, it’s this product:
https://www.zroverland.com/product-page/lc250-gx550-slider-step
They make a world of difference getting in and out with the oem rock rails. Adds some functionality without making the weight compromise that comes with most aftermarket steps. Love them.

 

[kekecarioca]

Yes, it’s this product:
https://www.zroverland.com/product-page/lc250-gx550-slider-step
They make a world of difference getting in and out with the oem rock rails. Adds some functionality without making the weight compromise that comes with most aftermarket steps. Love them.

Awesome! I bet they do!
I was thinking of designing a 3D printed something to clamp there and lower the step and easy to remove for offroad.
I also did not realize the LC250 and Gx had similar tube rock rails. That's why I could not find anything out there. Thanks for sharing the link!

 

[Jade4rTx]

Looks great! Have RB mud flaps on my wife’s Bronco, love them! Any drilling required to install the RB mud flaps on the 4Runner?

 

[NotApplicable]

I wonder if they're also developing a SKU for the non-Pro/Trailhunter, ie those with non-extended fender flares and less tire poke.

Sponsored