Haven't seen this before on the 6th gen, how do you do it on our 4Runners?I did the buckle/unbuckle seatbelt 20x tip. Kind of a pain, but it only takes a minute, and it's free.
Sponsored
Haven't seen this before on the 6th gen, how do you do it on our 4Runners?I did the buckle/unbuckle seatbelt 20x tip. Kind of a pain, but it only takes a minute, and it's free.
The "buckle/unbuckle 20x tip" is a popular workaround used to disable the seatbelt reminder chime. It is commonly used by owners of Subaru and some other vehicles to prevent annoying beeping while driving off-road, moving a vehicle slowly around a private property, or when a heavy object is placed on the passenger seat. [1, 2, 3]
Follow this exact sequence to use the 20-click trick:
Note: Disabling the chime does not actually disengage the airbag system or prevent you from wearing your seatbelt; it just stops the audio warning. However, disconnecting your vehicle's car battery will usually reset this setting, and you will have to repeat the 20-click process. [2, 10, 11, 12, 13]
- Turn on Accessories: Turn your car's ignition to the "ON" or accessory mode, but do not start the engine. For push-button start vehicles, press the ignition button twice without your foot on the brake pedal.
- The 20-Click Cycle: Within 30 seconds of turning the accessories on, fully insert and release the seatbelt buckle 20 times rapidly. You must fully insert the metal tongue into the receptacle and press the red release button each time.
- Turn Off the Car: Leave the seatbelt unbuckled on your 20th and final release, and turn the ignition completely off.
- Test: Start the vehicle normally. The seatbelt reminder chime for that specific seat should now be disabled. [9]
Could you tell me what make and model you are driving? I can confirm if this trick is known to work for your specific car.
AI responses may include mistakes.
[1] https://www.reddit.com/r/subaru/comments/1m277e8/the_20_clicks_trick_works/
[2] https://www.facebook.com/pushingpistons/posts/you-can-do-this-with-a-similar-process-for-other-cars-and-sometimes-its-actually/1251931953619982/
[3] https://www.youtube.com/watch?v=IGLfA1CAsqU
[4] https://www.subaruoutback.org/threads/how-to-guide-disable-subaru-seatbelt-alarm-chime.499461/
[5] https://www.facebook.com/groups/subaruwilderness/posts/1029825432266979/
[6] https://www.facebook.com/pushingpis...ound-on-this-toyota-gr86-an/1267657482047429/
[7]
[8] https://static.nhtsa.gov/odi/rcl/2021/RCRIT-21V683-8823.pdf
[9] https://www.subaruforester.org/threads/2021-sport-seat-belt-chime-omg-solved.843404/
[10] https://www.reddit.com/r/Subaru_Outback/comments/tof48w/how_to_disable_the_noseatbelt_chime/
[11]
[12] https://www.subaruoutback.org/threads/how-to-guide-disable-seatbelt-chime-on-driver-seat.566797/
[13] https://www.liberia.ubuy.com/product/3MTOTWT4Y-chiidiike-2-pcs-car-seat-belt-clips-car-seat-belt-silencers-auto-metal-insert-alarm-stopper-universal-automotive-car-seat-safety-belt-buckle-plugs-for
dont see how you could miss it in caristaI can tell you that turning off the chime for the front seats using Clarista didn’t work for me.
Thank you for sharing this! I used a similar procedure on my Crosstrek years back for the same annoyance.The "buckle/unbuckle 20x tip" is a popular workaround used to disable the seatbelt reminder chime. It is commonly used by owners of Subaru and some other vehicles to prevent annoying beeping while driving off-road, moving a vehicle slowly around a private property, or when a heavy object is placed on the passenger seat. [1, 2, 3]
Follow this exact sequence to use the 20-click trick:
Note: Disabling the chime does not actually disengage the airbag system or prevent you from wearing your seatbelt; it just stops the audio warning. However, disconnecting your vehicle's car battery will usually reset this setting, and you will have to repeat the 20-click process. [2, 10, 11, 12, 13]
- Turn on Accessories: Turn your car's ignition to the "ON" or accessory mode, but do not start the engine. For push-button start vehicles, press the ignition button twice without your foot on the brake pedal.
- The 20-Click Cycle: Within 30 seconds of turning the accessories on, fully insert and release the seatbelt buckle 20 times rapidly. You must fully insert the metal tongue into the receptacle and press the red release button each time.
- Turn Off the Car: Leave the seatbelt unbuckled on your 20th and final release, and turn the ignition completely off.
- Test: Start the vehicle normally. The seatbelt reminder chime for that specific seat should now be disabled. [9]
Could you tell me what make and model you are driving? I can confirm if this trick is known to work for your specific car.
AI responses may include mistakes.
[1] https://www.reddit.com/r/subaru/comments/1m277e8/the_20_clicks_trick_works/
[2] https://www.facebook.com/pushingpistons/posts/you-can-do-this-with-a-similar-process-for-other-cars-and-sometimes-its-actually/1251931953619982/
[3] https://www.youtube.com/watch?v=IGLfA1CAsqU
[4] https://www.subaruoutback.org/threads/how-to-guide-disable-subaru-seatbelt-alarm-chime.499461/
[5] https://www.facebook.com/groups/subaruwilderness/posts/1029825432266979/
[6] https://www.facebook.com/pushingpis...ound-on-this-toyota-gr86-an/1267657482047429/
[7]
[8] https://static.nhtsa.gov/odi/rcl/2021/RCRIT-21V683-8823.pdf
[9] https://www.subaruforester.org/threads/2021-sport-seat-belt-chime-omg-solved.843404/
[10] https://www.reddit.com/r/Subaru_Outback/comments/tof48w/how_to_disable_the_noseatbelt_chime/
[11]
[12] https://www.subaruoutback.org/threads/how-to-guide-disable-seatbelt-chime-on-driver-seat.566797/
[13] https://www.liberia.ubuy.com/product/3MTOTWT4Y-chiidiike-2-pcs-car-seat-belt-clips-car-seat-belt-silencers-auto-metal-insert-alarm-stopper-universal-automotive-car-seat-safety-belt-buckle-plugs-for