Everest N500 *Fiona* TRD ORP Build

[ChenMastaFlex]

Just a little something something on Fiona the 4runner

Work wheels xtrap M1HC 18x9 +25 (only 400 units made)
Nokian Outpost nAT 295/70/18
Stickerfab acrylic yellow overlays
Zekzoop Rain Guards
50% Windshield 20% Front sides

Did a liner tuck with stock suspension and no rubbing issues.

Collar lift in the near future.

Just did a 1600 mile road trip and she performed flawlessly! Absolutely love this beast!

Sponsored

 

[E.T.]

Those Work wheels are sick!!

No rub or trimming?

 

[Old Spice]

Those Work wheels are sick!!

Agreed. The gold / bronze face goes perfect with Everest.

That's one of the most aggressive looking +25 offset setups I've seen. Maybe the tires...

 

[ChenMastaFlex]

Those Work wheels are sick!!

No rub or trimming?

Nope! Removed the very bottom bolt for the liner and the 2 above that, tucked them in front of the bumper and the bottom was mounted into the hole where the air dam once mounted!

 

[Gastan]

I've always liked the polished lip multi-piece wheel look. Even better when they're contrasting colors like yours

What's the "N500" stand for?

 

[ChenMastaFlex]

I've always liked the polished lip multi-piece wheel look. Even better when they're contrasting colors like yours

What's the "N500" stand for?

Appreciate the love! Spent at least a good month looking at wheels and when I seen these had came out I just had to get them. They dropped July 18th of this year.

N500 is our generations model code!

 

[Darkchief22]

Local tire shop was pushing the nokians on me, how are they?

 

[ChenMastaFlex]

Local tire shop was pushing the nokians on me, how are they?

I love them! Held traction very well wet/dry, minimal road noise. The window visors/cross bars are louder. Originally was going to get the Baja boss A/T but my suppliers wouldn't get them in time so these were my 2nd choice. About 20lbs lighter than the MTs and overall size is 34.3" to 34.5"

Also they have this pothole protection thing where if the tire is beyond repair they will supply you with a new one!

 

[s3lekta]

Nope! Removed the very bottom bolt for the liner and the 2 above that, tucked them in front of the bumper and the bottom was mounted into the hole where the air dam once mounted!

Question, would you mind taking a pic of how you did the above? Thanks

 

[ChenMastaFlex]

Question, would you mind taking a pic of how you did the above? Thanks

Sponsored