I also noticed that I get some noise from the rear windows and when I checked the seals I can see that the seal that goes in is flush all the way around and then right when it gets near the front of the rear passenger window or either rear window. It kind of curves and I'm not sure if it was installed wrong or what but it kind of sticks out a little bit and I'm not sure if this is causing the wind noise.
Mine has that too. Noticed it from day one. I checked the lot las time I was at the dealer and all had it too. Must be the way the rubber gets molded from supplier... You can see there is a joint between the flush and curved section.I also noticed that I get some noise from the rear windows and when I checked the seals I can see that the seal that goes in is flush all the way around and then right when it gets near the front of the rear passenger window or either rear window. It kind of curves and I'm not sure if it was installed wrong or what but it kind of sticks out a little bit and I'm not sure if this is causing the wind noise.
That really does look terrible and very noticeable. I can't believe this is being passed off as "they are all that way" and normal. Certainly looks like a design/quality issue compared to the straight and beautiful straight weather stripping around my 5th gen rear windows.
I agree, not sure how that got the green light....
Do you notice the same wind noise on both rear passenger windows when on the highway?
Hard to say : I come from a a 3rd gen so this thing feels super quiet to me in comparison.
Same here. I also had another thread on this discussing the sloshing water in the rear liftgate.
