Disconnecting Battery Prior to Installing Ditch Lights

[YanMik]

Hey Folks, I have a Hybrid version
And I know it’s good practice to disconnect the battery to avoid problems and any shorts.

There’s Two Batteries.

Which Battery do I disconnect the black and red?

will doing this reset the major settings?

Sponsored

 

[Man Rome]

Just disconnect the ground on the battery that’s on the back. Do not touch the hybrid battery The settings will come back the same way they were before.

 

[YanMik]

Just disconnect the ground on the battery that’s on the back. Do not touch the hybrid battery The settings will come back the same way they were before.

Can you please provide a picture if you don't mind. I'm a visual learner.

 

[mcd_ovrlnd]

It’s the battery that is off to the left if you are looking into your cargo area from the rear. Right below the tire jack. The hybrid battery is underneath the cargo area and more difficult to access.

 

[YanMik]

It’s the battery that is off to the left if you are looking into your cargo area from the rear. Right below the tire jack. The hybrid battery is underneath the cargo area and more difficult to access.

Got it! Appreciate it!

 

[Timmybung]

FWIW I do lots of electrical projects (for instance installed Diode Dynamics ditch lights last week) and I never bother to disconnect the battery. Obviously do what makes you feel safe but as long as you're not arbitrarily connecting wires where they don't belong it's not necessary.

 

[YanMik]

FWIW I do lots of electrical projects (for instance installed Diode Dynamics ditch lights last week) and I never bother to disconnect the battery. Obviously do what makes you feel safe but as long as you're not arbitrarily connecting wires where they don't belong it's not necessary.

Thanks man! I finally connected them and yes, I did not need to disconnect hehe

Sponsored