Auxbeam RB80 XL Switch Panel install on Hybrid 4Runner TRD Off-Road Premium i-FORCE MAX

[NYNickET]

My Fellow 4Runner People,
On the HYbrid engine where do you hook up the main positive & negative cables that run from the battery into the AuxBeam Circuit Control Box under the hood?

The Battery itself is in the rear cargo area on a HYbrid. . . looking for a main positive lead under the hood for accessories, lights, etc. . . .

Thanks in advance.

Update: this is the final install. . . . feel free to ask me anything . . i'd be glad to help

Sponsored

 

[ScoMay]

I know very little about automotive electrical issues, so apologies in advance if this is of no help to you…

…but if you look in the owner manual pp.480-483 discuss the 4 AUX switches where there is a switched power source “AUX #5” that is a fifth route. I doubt that provides enough power for what your Auxbeam requires. It is only a 10A circuit.

That is all I can offer. Maybe someone who has installed a similar device can weigh in with what will answer your question.

 

[Sinnerman]

I was looking for the same thing for another light installation… I found this procedure that explain how to get the positive and negative in the engine compartement, for our hybrid version. Cheers!

https://www.bajadesigns.com/wp-cont...ota-4Runner-BTG-Squadron-Kit-Instructions.pdf

My Fellow 4Runner People,
On the HYbrid engine where do you hook up the main positive & negative cables that run from the battery into the AuxBeam Circuit Control Box under the hood?

The Battery itself is in the rear cargo area on a HYbrid. . . looking for a main positive lead under the hood for accessories, lights, etc. . . .

Thanks in advance

 

[NYNickET]

Hey Guys. . . i found this. . very helpful is you have a hybrid. . . . .

 

[NYNickET]

OK. . . so now i now have a Hybrid System malfunction message on my dash board. . . any suggestions ???

 

[NYNickET]

this is the final install. . . . feel free to ask me anything . . i'd be glad to help

 

[T_Pomp]

My Fellow 4Runner People,
On the HYbrid engine where do you hook up the main positive & negative cables that run from the battery into the AuxBeam Circuit Control Box under the hood?

The Battery itself is in the rear cargo area on a HYbrid. . . looking for a main positive lead under the hood for accessories, lights, etc. . . .

Thanks in advance.

Update: this is the final install. . . . feel free to ask me anything . . i'd be glad to help

I grounded the negative in the engine compartment and ran the positive cable all the way to the battery in the rear. I didn't want to mess with the fuse box, as some of the other people who have posted on here have. Not willing to potentially void any warranty by splicing/tapping into it.

 

[NYNickET]

I grounded the negative in the engine compartment and ran the positive cable all the way to the battery in the rear. I didn't want to mess with the fuse box, as some of the other people who have posted on here have. Not willing to potentially void any warranty by splicing/tapping into it.

there are two dedicated positive feeds in the fuse box on the passenger side specifically for accessories & to jump start the car if need be . . . .

Toyota knows everyone like to customize their 4Runners !

 

[Sinnerman]

there are two dedicated positive feeds in the fuse box on the passenger side specifically for accessories & to jump start the car if need be . . . .

Toyota knows everyone like to customize their 4Runners !

Thanks for the information! Can you point out where exaclty?

 

[NYNickET]

Thanks for the information! Can you point out where exaclty?

this guy shows you exactly where to find it

 

[NYNickET]

Sponsored