2026 SR5 OEM+ Build

[RWilliams]

If I read correctly on the westcott designs website, this is the 2.5” lift on the front and .75” lift on the rear? I am planning on switching to the same sized tires in the future, I was only going to go with the front leveling kit. But I might have to go this route, looks awesome!

Sponsored

 

[rgall927]

If I read correctly on the westcott designs website, this is the 2.5” lift on the front and .75” lift on the rear? I am planning on switching to the same sized tires in the future, I was only going to go with the front leveling kit. But I might have to go this route, looks awesome!

Thanks! yeah, I'd personally go with the front and the rear, otherwise it won't technically be leveled. I know some guys don't include the front top hat when they do the install to keep a slight forward rake, but I did the full front and rear on mine. So 2.5" up front and 0.75" in the rear

 

[morsk]

The install is not horrible. A little bit involved, but there a few good tutorials out there. Biggest thing is keeping track of all the screws/pins/clips that you have to remove. I used a bunch of labeled ziploc bags to track everything.

I'm having such a hard time taking the grille off. I've unscrewed just about everything, but I'm not sure what to do next with these pins to get it out and insert the new one. It seems like every video I saw skipped over or just voiced over this step lol

 

[morsk]

 

[rgall927]

You need to use a flathead screwdriver or something to undo the tabs on the actual grill from the surround. There's a bunch of them and I wasn't super clear either based on the videos I watched

 

[rgall927]

I think this was the video that showed that part the clearest.

 

[morsk]

I think this was the video that showed that part the clearest.

Yeah the part I'm having trouble with are the clips on the lower grille - around the 8:30 mark
Can't get those loosened at all

Sponsored